GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Black List call
Re: [GMCnet] Black List call [message #261572 is a reply to message #261570] Thu, 11 September 2014 09:26 Go to previous messageGo to previous message
George Zhookoff is currently offline  George Zhookoff   United States
Messages: 398
Registered: December 2004
Location: Snellville, GA
Karma:
Senior Member
Karen's 1 ton installation write up calls for a different torque setting.

George Zhookoff


> On Sep 11, 2014, at 9:42 AM, "Jim Miller" wrote:
>
> We are talking about the bolts that attach the inboard CV joints to the final drive's output flanges; these are not the bolts that you are referring to.
>
> Torque specs for important fasteners are listed in the service manual. I do not trust my memory so I check the manual when in doubt.
>
> --Jim
>
>> On Sep 11, 2014, at 9:19 AM, Mickey Szilagyi wrote:
>>
>> We just had the oil changed in our new 3.70 final drive after about 1000 miles of break-in. We had the pan removed so they could inspect the inside
>> and they put on a new gasket which I think we got with the FD. Are these the bolts you are talking about, that hold the pan on? Thinking about this
>> I don't think it's them but the bolts that actually hold the FD in place. What torque should be used to hold these bolts in place?
>>
>> Thanks.
>> --
>> Mickey
>> 1977 Kingsley, 403, Lansing, MI
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] GMC MM '96 January, GMC II and so on
Next Topic: Non GMC, US embassy in Oslo Norway testing out Norwegian Xmas food
Goto Forum:
  


Current Time: Sun Oct 06 12:52:07 CDT 2024

Total time taken to generate the page: 0.00900 seconds