Home » Public Forums » GMCnet » oil cooler adapter gasket (how much should it be torqued?)
Re: oil cooler adapter gasket [message #260618 is a reply to message #260615] |
Mon, 01 September 2014 08:47 |
rjw
Messages: 697 Registered: September 2005
Karma:
|
Senior Member |
|
|
Larry wrote on Mon, 01 September 2014 08:59I had crush and leak problems at the cooler adaptor for years. At an oil change, I would move the seal from the old filter to the new location between the oil filter cooler adaptor and the block...you know...like we have been instructed to do by GMC'rs for ever. At the next oil change I'd take it apart, noticing the oil leak and the damaged gasket. Then one day at a Greater Midwest Classics rally, I happened to mention this to the late Bob Drews. Bob said...in his gentle wise tone..."Think about what you are doing here." You are using a gasket here that is designed to be wet with oil and the filter screwed down against it in a place where you are not turning the adaptor against the gasket. You oil the gasket so that it slides as the filter is screwed down tight. You are not turning the adaptor, so there is no need to use oil on the gasket. Get up in there, and clean the surfaces of oil, put the dry gasket in place and tighten it down. You will have no more damaged gasket and no leak. So, I tried it. Sure enough, no leak, and no more damaged gasket. Bob continues to educate us from the great GMC'rs in the sky. I love that guy....
Larry,
I never really met Bob, but was in attendance at the seminars he did and the BS sessions where he spoke up at the GMCMI conventions. A very smart man and I certainly miss his input on the GMCnet and the EFI group.
It does make sense, what he said about not oiling the gasket. I'll try that today. How much torque did you use?
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
|
|
|
|
|
oil cooler adapter gasket
By: rjw on Sun, 31 August 2014 18:53
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: rjw on Sun, 31 August 2014 20:38
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: roy1 on Sun, 31 August 2014 21:04
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Sun, 31 August 2014 22:28
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: k2gkk on Mon, 01 September 2014 16:42
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Mon, 01 September 2014 19:02
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: rjw on Sun, 31 August 2014 23:31
|
|
|
Re: oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Mon, 01 September 2014 09:01
|
|
|
Re: oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: k2gkk on Mon, 01 September 2014 16:35
|
|
|
Re: oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: rjw on Mon, 01 September 2014 07:56
|
|
|
Re: oil cooler adapter gasket
By: Larry on Mon, 01 September 2014 07:59
|
|
|
Re: oil cooler adapter gasket
By: rjw on Mon, 01 September 2014 08:47
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Mon, 01 September 2014 09:46
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: rjw on Mon, 01 September 2014 11:28
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Mon, 01 September 2014 12:38
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: rjw on Mon, 01 September 2014 13:10
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: rjw on Mon, 01 September 2014 15:24
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: oil cooler adapter gasket
By: Larry on Mon, 01 September 2014 19:10
|
|
|
Re: oil cooler adapter gasket
By: Larry on Mon, 01 September 2014 19:11
|
|
|
Re: oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Mon, 01 September 2014 23:13
|
|
|
Re: oil cooler adapter gasket
By: rjw on Tue, 02 September 2014 09:57
|
|
|
Re: oil cooler adapter gasket
|
|
|
Re: oil cooler adapter gasket
|
|
|
Dorman 917-036 was Re: oil cooler adapter gasket
|
|
|
Re: [GMCnet] Dorman 917-036 was Re: oil cooler adapter gasket
By: USAussie on Tue, 02 September 2014 17:02
|
|
|
Re: [GMCnet] Dorman 917-036 was Re: oil cooler adapter gasket
By: USAussie on Fri, 07 November 2014 17:50
|
|
|
Re: oil cooler adapter gasket
|
|
|
Re: oil cooler adapter gasket
By: rjw on Sun, 14 September 2014 14:52
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Mon, 15 September 2014 00:07
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Tue, 16 September 2014 01:10
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: rjw on Tue, 16 September 2014 09:22
|
|
|
Re: [GMCnet] oil cooler adapter gasket
|
|
|
Re: [GMCnet] oil cooler adapter gasket
By: USAussie on Tue, 16 September 2014 11:16
|
Goto Forum:
Current Time: Sun Jun 16 02:21:19 CDT 2024
Total time taken to generate the page: 0.00790 seconds
|