GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » GMCer on road needs right rear control arm
Re: [GMCnet] GMCer on road needs right rear control arm [message #259519 is a reply to message #259514] Wed, 20 August 2014 19:09 Go to previous messageGo to previous message
emerystora is currently offline  emerystora   United States
Messages: 4442
Registered: January 2004
Karma:
Senior Member
The person that made the small screw device was Dale Ropp of Marysville, MI. I believe he did that at the Pueblo GMCMI convention.
Emery Stora

On Aug 20, 2014, at 5:57 PM, Ken Burton wrote:

> midlf wrote on Wed, 20 August 2014 16:00
>> I've no idea if this is a valid idea but: Would replacing the entire bogie assembly be easier than just replacing one arm?
>
>
>
> Both are a big job, especially if done on the road. I would be straightening the original one if possible with a porta power or other device if
> possible. We have not seen the damage. It is a 1/2 hour job. At one GMCMI rally someone showed up with a screw device and we were straitening
> bogies for people. None took more than 1/2 hour.
>
> The toe in (and out) is the important thing. Caster does not exist on a rear wheel. Camber should be zero but being off a little bit will not hurt
> anything and could be corrected if necessary several thousand miles later.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Is this an ATP Filter
Next Topic: [GMCnet] Interesting Tool Sets on eBay
Goto Forum:
  


Current Time: Sun Jul 07 22:46:12 CDT 2024

Total time taken to generate the page: 0.01124 seconds