GMCforum: GMCnet » [GMCnet] Repairing Flare Fittings

Home » Public Forums » GMCnet » [GMCnet] Repairing Flare Fittings

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Repairing Flare Fittings [message #257643 is a reply to message #257641]

Sun, 03 August 2014 15:44

bdub

Messages: 1578
Registered: February 2004
Location: Central Texas

Karma:

Senior Member

I think Jim has them.

But
http://www.gsistore.com/3-4-sae-b2-12-copper-flare-gasket.html for 3/4,
b2-4 for 1/4, b2-6 for 3/8, etc., ...

On Aug 3, 2014 3:30 PM, "Joe Crutchfield" wrote:
>
> Ken, you have been reading my mind again! Your post comes at a very
appropriate time for me. I just installed new 3/8 inch transmission cooler
lines
> that I purchased from Jim K. and the lower radiator fitting is still
trying to leak. I tightened it until I was afraid I would break the
fitting in
> the radiator. Bob Burkitt told me he thought you knew where to find the
washers and if my leak continued I was going to ask you about them.
> Hopefully someone will know where to get them but I will also do some
searching.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm

Report message to a moderator

[Message index]

		[GMCnet] Repairing Flare Fittings By: Ken Henderson on Sun, 03 August 2014 10:44
		Re: [GMCnet] Repairing Flare Fittings By: X on Sun, 03 August 2014 15:30
		Re: [GMCnet] Repairing Flare Fittings By: roy1 on Sun, 03 August 2014 15:44
		Re: [GMCnet] Repairing Flare Fittings By: bdub on Sun, 03 August 2014 15:44
		Re: [GMCnet] Repairing Flare Fittings By: Matt Colie on Sun, 03 August 2014 16:45
		Re: [GMCnet] Repairing Flare Fittings By: midlf on Sun, 03 August 2014 16:03
		Re: [GMCnet] Repairing Flare Fittings By: Ken Henderson on Sun, 03 August 2014 17:12
		Re: [GMCnet] Repairing Flare Fittings By: Mr ERFisher on Sun, 03 August 2014 18:32
		Re: [GMCnet] Repairing Flare Fittings By: Ken Henderson on Sun, 03 August 2014 18:57
		Re: [GMCnet] Repairing Flare Fittings By: GMC Cruse on Sun, 03 August 2014 20:03
		Re: [GMCnet] Repairing Flare Fittings By: kerry pinkerton on Sun, 03 August 2014 18:37

Previous Topic:	David Gourdine's Travelling GMC Show
Next Topic:	[GMCnet] ft wheel bearings

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Oct 05 21:11:29 CDT 2024

Total time taken to generate the page: 0.00584 seconds