GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Route 66 Rolling Rally.
Re: [GMCnet] Route 66 Rolling Rally. [message #252611 is a reply to message #252606] Thu, 19 June 2014 07:24 Go to previous messageGo to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma:
Senior Member
Well, Thursday with the GMC Route 66 Rolling Rally finds us at Oklahoma
City, OK. Presently experiencing an electrical storm with rain. No Hail as
of yet. Yesterday was a real scorcher. Ran generators and roof airs for
much of the afternoon. We were rejoined by John and Deb Harper last
evening. Camping World had them towed to a nearby specialty shop who deals
in Rochester Quadrajet Carbs. They took the carb off and put it on their
bench, and guess what. The float was sitting on the bottom of the float
bowl. The original carb, which Camping World replaced with a different year
carb, had a sunk float. The replacement carb ran from Tuscon to Potato
Creek State Park, IN. and from there to Chicago. When leaving, they were
experiencing rich running and stall outs. They limped in to the 4H
campground in Pontiac, IL. I took the carb apart and found the float full
of Gasoline. Soldered up the 3 leaks and we left for Springfield, IL. No
problems. Then on to Cahokia, IL where we again had problems. Ran rich, so
drove straight through to Randy VanWinkle's where I changed the float with
a new one. Wasn't quite right, a bit too high. Lowered the float level
beside the road. Got as far as Joplin, MO where it quit again. Went back to
Camping World on the Hook, about a 220 mile tow job. Now on float number 3.
This time we opted for a plastic one instead of a brass one. We will see
how far this one gets before it goes sideways. I have been working on
Quadrajets since the 70's when they first were introduced. Never have I
seen issues with the floats until now. Can't explain it. We leave for Elk
City, OK after a while. We will see how it does on the road.
Jim and Judy Route 66 Rolling Rally
Oklahoma City, OK.


On Thu, Jun 19, 2014 at 7:15 AM, Ken Henderson
wrote:

> Dwayne,
>
> Perhaps the transmission mounts were not re-tightened, allowing the drive
> train to rotate under torque and the fan to hit the shroud?
>
> I'm about to replace those mounts for my Cad500 because of that occasional
> problem when I fully use the Cad's torque.
>
> Ken H.
>
>
> On Wed, Jun 18, 2014 at 11:04 PM, dwayne jacobson dwayne.jacobson@gmail.com
>> wrote:
>
>> We are in a campsite in brigham ut.
>> We nursed the coach here. When ever er apply torque theres a rattling
>> noise
>> coming up from the engine compart. Take the foot off thr gas it g oes
>> quiet.
>> Help
>>
>> dwayne j
>> On 2014-06-18 9:04 AM, "Glenn Whitt" wrote:
>>
>>> Again Jim, we have stayed at the Waters Edge RV Park many times and you
>>> are right it is a great place to camp, just back up to the water and
>> enjoy
>>> the
>>> deck. You are finding my best kept secrets...lol Hope you continue to
>>> have a great trip and find many more great camping spots.
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Window Valance
Next Topic: Replacing the Water Heater Element
Goto Forum:
  


Current Time: Sat Oct 05 22:57:14 CDT 2024

Total time taken to generate the page: 0.01176 seconds