GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Front seats
Re: Front seats [message #249243 is a reply to message #249166] Fri, 09 May 2014 12:24 Go to previous messageGo to previous message
stick miller is currently offline  stick miller   United States
Messages: 1036
Registered: March 2010
Location: Americus, Georgia
Karma:
Senior Member
I'm 6'5" and have a 76 Eleganza that had OEM seats. Although I found them uncomfortable, my problem was with legroom rather than height. I had a welder add a 2" plate to the base and it gave me additional room to slide back. That didn't work as well in my rear twin Royale since the driver's seat hit the kitchen cabinet.

I've never felt as though I'm looking through the top of the windshield and, in fact, would like to sit a bit higher up. (Maybe a cushion). I do have the round wooden ball seat covers and after a few hours of driving I think I could count those balls with my bony rear end.

I think the '76 seats must have been very different from the '73s although both could stand upgrading. My 65 year old semi-arthritic body could use some upgrading, also.


Stick Miller
'78 Royale - "White Trash" - she left me for another man
'76 Eleganza - "Cousin Eddie" Sold
'84 Bluebird Wanderlodge - "Past Tents"
Americus, GA
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] $400 Corian countertop sound about right?
Next Topic: [GMCnet] A Message From Glenn & BJ Herzberger's Daughter about BJ
Goto Forum:
  


Current Time: Thu Jun 20 06:31:56 CDT 2024

Total time taken to generate the page: 0.00789 seconds