GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Caddy 500 torque converter
Re: Caddy 500 torque converter [message #246636 is a reply to message #246517] Mon, 07 April 2014 09:09 Go to previous messageGo to previous message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma:
Senior Member
Another source for torque converter is Dick Paterson. I went through 4 TC's from another supplier before I finally asked Dick about it. He has a supplier that has been building TC's for him for 20 or 30 yrs. and trusts the builder. A TC from either Midwest or Dick could be trusted.

Also, I'm not sure what the stall speed for my 500 is. Those records are at home and I am on the road....but...IMO 2K stall is quite high for the 500. Call and talk with MTC or Dick and follow their advise. JWID

Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Radiator trans cooler fittings
Next Topic: Quick fuel pump opinion
Goto Forum:
  


Current Time: Sat Sep 28 16:18:49 CDT 2024

Total time taken to generate the page: 0.00562 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software