Re: Caddy 500 torque converter [message #246560 is a reply to message #246534] |
Sun, 06 April 2014 16:08 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to previous message](/GMCforum/theme/default/images/down.png) |
winter
![United States United States](/GMCforum/images/flags/us.png) Messages: 247 Registered: September 2007 Location: MPLS MN
Karma:
|
Senior Member |
|
|
Larry wrote on Sun, 06 April 2014 08:57 | Yes, that TC is interchangeable and will work with the Cad 500. However, the stall may not be right for the 500. While you have it out, I'd send your TC to Midwest Torque Converter in St. Paul Mn. for rebuilding. Tell them what engine it will be in, and that it will be in a 12,000 lb vehicle. They will also need to know the HP and Torque curve of the Cad 500. They will then build the TC to optimize those specs. JWID
|
Larry,
Do know what stall speed is best? I would guess some where @ 2000 rpm or less with a 500.
I thought I read at one point the stock tc is @ 2600 with the 403 or 455.
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
|
|
|