GMCforum: GMCnet » [GMCnet] Upper ball Joint replacement.

Home » Public Forums » GMCnet » [GMCnet] Upper ball Joint replacement.

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Upper ball Joint replacement. [message #242472 is a reply to message #242443]

Thu, 06 March 2014 10:22

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

BobDunahugh wrote on Thu, 06 March 2014 02:24

I'm really surprised that the upper ball joint needs to be replaced. As the one that's in there now is bolted in. Thus a replacement. Is that one pressed in with the bolts holding the joint in place. Shouldn't it be a case of just taking the bolts out. Should be real simple. RIGHT? Bob Dunahugh Member GMCMI78 Royale.

Bob,

In my '73 it was riveted in and there was no press into the upper arm.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		[GMCnet] Upper ball Joint replacement. By: BobDunahugh on Thu, 06 March 2014 01:24
		Re: [GMCnet] Upper ball Joint replacement. By: Matt Colie on Thu, 06 March 2014 10:22
		Re: [GMCnet] Upper ball Joint replacement. By: Loffen on Thu, 06 March 2014 11:04
		Re: [GMCnet] Upper ball Joint replacement. By: mikethebike on Thu, 06 March 2014 20:46
		Re: [GMCnet] Upper ball Joint replacement. By: Steve on Thu, 06 March 2014 20:53
		Re: [GMCnet] Upper ball Joint replacement. By: Bullitthead on Thu, 06 March 2014 20:58
		Re: [GMCnet] Upper ball Joint replacement. By: emerystora on Thu, 06 March 2014 21:15
		Re: [GMCnet] Upper ball Joint replacement. By: USAussie on Fri, 07 March 2014 01:00
		Re: [GMCnet] Upper ball Joint replacement. By: emerystora on Fri, 07 March 2014 01:47
		Re: [GMCnet] Upper ball Joint replacement. By: Carl S. on Fri, 07 March 2014 12:54
		Re: [GMCnet] Upper ball Joint replacement. By: Craig Lechowicz on Thu, 06 March 2014 21:23
		Re: [GMCnet] Upper ball Joint replacement. By: winter on Sat, 08 March 2014 09:17
		Re: [GMCnet] Upper ball Joint replacement. By: mtnman111 on Sat, 08 March 2014 09:30
		Re: [GMCnet] Upper ball Joint replacement. By: USAussie on Sat, 08 March 2014 18:10
		Re: [GMCnet] Upper ball Joint replacement. By: USAussie on Sat, 08 March 2014 18:15
		Re: [GMCnet] Upper ball Joint replacement. By: corleyw on Mon, 10 March 2014 09:12
		Re: [GMCnet] Upper ball Joint replacement. By: USAussie on Mon, 10 March 2014 16:25
		Re: [GMCnet] Upper ball Joint replacement. By: rgogan on Sat, 10 March 2018 14:07
		Re: [GMCnet] Upper ball Joint replacement. By: rgogan on Sat, 10 March 2018 14:28
		Re: [GMCnet] Upper ball Joint replacement. By: James Hupy on Sat, 10 March 2018 14:39
		Re: [GMCnet] Upper ball Joint replacement. By: USAussie on Sat, 10 March 2018 17:08
		Re: [GMCnet] Upper ball Joint replacement. By: JohnL455 on Sun, 09 March 2014 10:14
		Re: [GMCnet] Upper ball joint replacement By: BobDunahugh on Mon, 10 March 2014 02:38
		Re: [GMCnet] Upper ball Joint replacement. By: JohnL455 on Mon, 10 March 2014 16:31
		Re: [GMCnet] Upper ball Joint replacement. By: jhbridges on Sun, 11 March 2018 09:23
		Re: [GMCnet] Upper ball Joint replacement. By: JohnL455 on Mon, 12 March 2018 21:47
		Re: [GMCnet] Upper ball Joint replacement. By: Bullitthead on Mon, 12 March 2018 22:55

Previous Topic:	Any GMC from Florida going to Tucson
Next Topic:	Re: [GMCnet] Adjusting 403 power steering belt. All my manuals burned up.

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 04 16:30:31 CDT 2024

Total time taken to generate the page: 0.00977 seconds