GMCforum: GMCnet » [GMCnet] The Governor

Home » Public Forums » GMCnet » [GMCnet] The Governor

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] The Governor [message #226545 is a reply to message #226542]

Tue, 22 October 2013 09:54

mickey szilagyi

Messages: 273
Registered: January 2013

Karma:

Senior Member

Thanks Wally (HTH),

To completely understand your instructions I'd have to see what you're talking about. That would happen when having to replace the governor. I'll put together an instruction sheet and put it with our spare governor along with some 1/8 bits. Need to figure out how to use the bits - don't really want to carry a cordless drill but might be a good idea.

So, drill the hole with the old governor as a template then to get it in the right spot?

And the nail is to unhinge the weights?

By the way, found a bunch of short double ended 1/8 drill bits at Harbor Freight.

http://www.harborfreight.com/7-piece-1-8-eighth-inch-double-end-titanium-nitride-m2-drill-bits-66213.html

Thanks again.

Mickey 1977 Kingsley, 403, Lansing, MI

[Updated on: Tue, 22 October 2013 09:57]

Report message to a moderator

[Message index]

		[GMCnet] The Governor By: Gary Berry on Mon, 21 October 2013 19:31
		Re: [GMCnet] The Governor By: lqqkatjon on Mon, 21 October 2013 20:12
		Re: [GMCnet] The Governor By: jim kanomata on Tue, 22 October 2013 00:51
		Re: [GMCnet] The Governor By: mickey szilagyi on Tue, 22 October 2013 07:13
		Re: [GMCnet] The Governor By: wally on Tue, 22 October 2013 09:31
		Re: [GMCnet] The Governor By: Emery Stora on Tue, 22 October 2013 09:40
		Re: [GMCnet] The Governor By: mickey szilagyi on Tue, 22 October 2013 09:54
		Re: [GMCnet] The Governor By: wally on Tue, 22 October 2013 10:27

Previous Topic:	Armand Minnie's Front Spoiler
Next Topic:	Search Current Craigslist-USA GMC Motorhome Ads

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 01 08:16:47 CDT 2024

Total time taken to generate the page: 0.00704 seconds