Re: [GMCnet] losing power [message #220231 is a reply to message #220223] |
Wed, 28 August 2013 15:31 |
|
SeanKidd
Messages: 747 Registered: June 2012 Location: Northern Neck Virginia
Karma:
|
Senior Member |
|
|
I installed a cloyes double roller on my Melling MTO-1 RV cam, straight up on the gear alignment dots, (some say you can advance one key space) rebuilt heads, bearings, rings, Honed, blocked crossovers, rebuilt carb, I'm getting 19" vacuum at idle. Carb throttle shaft nylon bushings added 1" alone. I would check your manifold for cracks or slipped turkey tray on install...try spraying carb cleaner around the edges an listen for smoother idle.
Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers
|
|
|