Re: [GMCnet] Inteli-Power PD9140A KaPut... [message #217046 is a reply to message #217039] |
Mon, 05 August 2013 11:40 |
powerjon
Messages: 2446 Registered: January 2004
Karma:
|
Senior Member |
|
|
Gary,
Was the transmission still shifting when the speedometer was not working? If they both failed at the same time then you have lost the gear on the bottom of the governor.
JR Wright
78 Buskirk Stretch
75 Avion
Michigan
On Aug 5, 2013, at 12:24 PM, Gary Berry <duallycc@gmail.com> wrote:
> Hey Jim;
>
> I forgot to mention that the speedometer isn't working either. I'll
> check the vacuum line for sure as I just installed the EFI (about 750
> miles ago) and the vacuum line could have disconnected for some
> reason. Thanks for the info.
> --
> Gary and Diana Berry
> 73 CL Stretch in Wa.
>
> On Mon, Aug 5, 2013 at 9:20 AM, James Hupy <jamesh1296@gmail.com> wrote:
>> Gary, if your transmission will not upshift, it is usually a vacuum
>> problem..Check the line to the Modulator from the manifold first. Then all
>> other vacuum lines and include the carb base.
>> Jim Hupy
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|