Re: [GMCnet] Vacuum pump problem/question [message #203535 is a reply to message #203522] |
Wed, 03 April 2013 13:46 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to previous message](/GMCforum/theme/default/images/down.png) |
Ken Burton
![United States United States](/GMCforum/images/flags/us.png) Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
That is the same pump I am using and it is plumbed the same way as you have it.
Ken B.
Ken Henderson wrote on Wed, 03 April 2013 12:14 | Kerry,
Does your vacuum pump look like this one:
http://www.gmcmhphotos.com/photos/vacuum-pump-repair/p39177-vacuum-pump-fix.html
or
http://goo.gl/CtyB5
If so, it's supposed to go in series in the hose from the intake manifold
to the vacuum booster. So it will indeed blow back into the manifold, as
long as there's air to be exhausted from the booster -- just as the engine
should be doing when running.
Fact is, with your new booster, if still using the illustrated pump, you
shouldn't use the second booster port.
Ken H.
On Wed, Apr 3, 2013 at 12:30 PM, Kerry Pinkerton wrote:
>
>
> Paul and Nancy Doane visited last night and he drove my coach. I started
> asking some questions about vacuum and he noticed that while my coach ran
> great, the vacuum guage read a bit higher than his did. This morning
> before they left we did some poking and Paul noticed that when the vacuum
> pump came on, it blew back through the manifold and up through the carb.
> We pulled the booster vacuum line and sure enough when you press the brake
> pedal to trigger the pump, it blows back through the manifold vacuum line.
> ...
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|