GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Propane / Electric Water Heater Install (How to address outside door on curved panel)
Re: [GMCnet] Propane / Electric Water Heater Install [message #189899 is a reply to message #189882] Sun, 11 November 2012 16:42 Go to previous messageGo to previous message
mickeysss is currently offline  mickeysss   United States
Messages: 1476
Registered: January 2012
Karma:
Senior Member

real design innovations, clever storage, looks great, massive good feelings looking at this rig,

home away from home away from home, 007 home. looks great with black stripe along width of windows too.

i want a pantry slide out like that. thank you for the pictures.

mickey

77 palm beach

anaheim ca.



On Nov 11, 2012, at 11:49 AM, Ken Henderson wrote:

> Joe,
>
> Take a look at my X-Birchaven here:
>
> http://www.gmcmhphotos.com/photos/our-x-birchaven/p438.html
>
> It should be obvious that the Atwood 6 g. water heater is mounted on an
> inclined base to align it with the lower curvature of the body. All
> Birchavens and Royales were that way from the Coachmen factory. I can't
> imagine that your Suburban would mind being out of level, but if I did, I'd
> set it up that way in the yard and run it a few days to see if it survives.
>
> JWID,
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI+ & EBL
> www.gmcwipersetc.com
>
>
>
> On Sun, Nov 11, 2012 at 2:20 PM, Joe Kemenczky wrote:
>
>> ...
>> Now to my question.. Not using the electric water heater that came with
>> it. Installing a Suburban 6 gal direct spark electric water heater. Going
>> to install it beside the furnance out the drivers side through the
>> fiberglass bottom panel.
>> The part I am unsure of and after calling Suburban with no help. How do I
>> address the inward curve of the fiberglass panel with the water tank and
>> the outside door. Almost a inch curve in.
>>
>> Can I install it out of level with the floor and follow the angle of the
>> panel?...
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Wheels/Tyres
Next Topic: Really Good Deal for Someone Closer Than Me
Goto Forum:
  


Current Time: Fri Sep 20 18:02:38 CDT 2024

Total time taken to generate the page: 0.00872 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software