GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Propane / Electric Water Heater Install (How to address outside door on curved panel)
Re: Propane / Electric Water Heater Install [message #189889 is a reply to message #189878] Sun, 11 November 2012 15:38 Go to previous messageGo to previous message
mojoe is currently offline  mojoe   United States
Messages: 319
Registered: November 2012
Location: Monroe, NC
Karma:
Senior Member
Thanks Ken and Mike..
I've look at many many many pictures of the GMC and noticed on some there was a water heater mounted on the angle like yours Ken. I really don't see any reason it won't work at an angle but what do I know.. ha. Wish my GMC looked like yours Ken, If it did I would be gone today!

Mike if you open your outside door on the water heater does it look like it runs with the wall or some kind of helper flange to help straighten it out?

Also gave great thought to the on demand Water heater. Mike.. But the only place I could see it going was behind the fridge and really was not comfortable with it there. I think the elctric part will save me some propane while hooked up.
I also looked all over the net for some kind of angle flange but nothing.

Welp whatever happens got a 12 3/4" x 12 3/4" hole in the side of my RV now. So guess its gonna be out of level.


Joe Kemenczky.. 1975 Eleganza ll " Odie " 75,000 miles.. "When I was younger, I could remember anything, whether it had happened or not." - Mark Twain. .
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Wheels/Tyres
Next Topic: Really Good Deal for Someone Closer Than Me
Goto Forum:
  


Current Time: Fri Sep 20 18:02:00 CDT 2024

Total time taken to generate the page: 0.00628 seconds