GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] The risk of publishing GMC info on Social Media
[GMCnet] should I bag my plans to do bag work [message #188322 is a reply to message #188302] Fri, 26 October 2012 08:56 Go to previous messageGo to previous message
Douglas Norton is currently offline  Douglas Norton   United States
Messages: 191
Registered: April 2008
Karma:
Senior Member
I have extenders to mount my air bags higher so I can run at a lower pressure.  Planned to do the job today.  I am partly prepared, bought used extenders a year ago, bought a 1 and an eighth socket Tuesday. Asked for an eighteen sixteenths socket and the guy could not find it.  Ha, he did not appreciate my humor!  

Now the questions:  1. do I have to remove the T skirt? 2. will I need more air line and connectors as the location will move? 3. will I need to move the leveling valves?  Removing the shutoff and schrader valves looks problematic; can I just unscrew the bag from the last connection of the air line parts?  Can I use Teflon tape or should I use some kind of paste to seal the connections?   I had a lot more questions but they were answered on Gene's site.

Is the correct answer, "take it to Jim"?

Doug Norton
73 Sequoia towing the tiny teal tone toad

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Comparison of Wood Dinette and Flexsteel Dinette?
Next Topic: Re: [GMCnet] Resting In Peace
Goto Forum:
  


Current Time: Wed Jun 26 07:26:03 CDT 2024

Total time taken to generate the page: 0.09235 seconds