GMCforum: GMCnet » Intake gaskets

Home » Public Forums » GMCnet » Intake gaskets

Show: Today's Messages :: Polls :: Message Navigator

Re: Intake gaskets [message #186490 is a reply to message #186440]

Fri, 05 October 2012 17:55

winter

Messages: 247
Registered: September 2007
Location: MPLS MN

Karma:

Senior Member

I replaced my cracked 403 intake manifold with an edelbrock intake with block off plates. I changed the choke over to an off the shelf electric choke. It works good in warm weather but in temps below about 40 F it is a cold blooded pig.

If I set the choke good for warm weather, it pulls off way to fast in cold weather. I would recommend getting one of the "intake heat sensing chokes" instead of the "amperage heats the element type chokes". I plan to get one the next time I place an order with Jim.

Report message to a moderator

[Message index]

		Intake gaskets By: RICKUS on Fri, 05 October 2012 02:57
		Re: [GMCnet] Intake gaskets By: Mr ERFisher on Fri, 05 October 2012 03:05
		Re: [GMCnet] Intake gaskets By: USAussie on Fri, 05 October 2012 08:35
		Re: [GMCnet] Intake gaskets By: powerjon on Fri, 05 October 2012 08:36
		Re: Intake gaskets By: Ken Burton on Fri, 05 October 2012 10:27
		Re: Intake gaskets By: RICKUS on Fri, 05 October 2012 16:56
		Re: Intake gaskets By: Ken Burton on Fri, 05 October 2012 21:53
		Re: Intake gaskets By: RICKUS on Fri, 05 October 2012 22:02
		Re: Intake gaskets By: winter on Fri, 05 October 2012 17:55
		Re: [GMCnet] Intake gaskets By: Steven Ferguson on Sat, 06 October 2012 06:30
		Re: Intake gaskets By: GeorgeRud on Fri, 05 October 2012 18:52

Previous Topic:	Next from the EPA
Next Topic:	Fire and related issues

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jun 26 11:18:42 CDT 2024

Total time taken to generate the page: 0.01945 seconds