GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Onan - Vapor Lock?
Re: [GMCnet] Onan - Vapor Lock? [message #178612 is a reply to message #178609] Wed, 01 August 2012 00:43 Go to previous messageGo to previous message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma:
Senior Member
Rob,

That's an interesting comment about your gas cap. What would happen if you remove the cap while the Onan is sputtering? Do you think she'd even out?

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA

On Jul 31, 2012, at 9:26 PM, "Rob Mueller" <robmueller@iinet.net.au> wrote:

> Mac,
>
> Go to page 38 in the 6KW Onan Manual below:
>
> http://www.bdub.net/manuals/Onan/Onan6kwNH_Major-Service.pdf
>
> There you will find the parts list for the carb. The fuel comes in the pointy end of the needle valve so it would be possible for
> pressure to "blow" it open.
>
> HOWEVER, when one considers how much surface area is exposed to the pressure I believe you are correct as it would take one hell of
> a lot more than the gas expanding on a hot day. Also I reckon the vent lines to the carbon canister should keep the pressures down
> in the tanks.
>
> I have noted on hot days when I remove the gas tank fill valve I do get a burst of pressure.
>
> I like the Facet Gold Series as it appears it is a direct replacement for the existing pump which I will verify when I check the
> output pressure of the existing pump.
>
> Regards,
> Rob M.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Propotioning valve
Next Topic: [GMCnet] Driving from Santa Fe to Taos
Goto Forum:
  


Current Time: Sat Oct 05 22:08:53 CDT 2024

Total time taken to generate the page: 0.01577 seconds