GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] motor and transmission removal
Re: [GMCnet] motor and transmission removal [message #169195 is a reply to message #169182] Thu, 10 May 2012 19:48 Go to previous messageGo to previous message
mike miller   United States
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma:
Senior Member
midlf wrote on Thu, 10 May 2012 17:15

Mike Miller wrote on Tue, 08 May 2012 11:34

Someone, sometime, posted some pictures of modifying the original "horse collar" type fan shroud into a split shroud. I THOUGHT it was KenH. ...


This one?

http://www.gmcws.org/Tech/fan_shroud/fanshroud.htm


Yes!

That is the one.

The only thing I would add would be a bit of foam around the inside of the new "venturi ring." The tips of the fan would self-trim the foam for a close fit and effective air flow.


Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Windshield installer on east coast
Next Topic: Sliding window weatherstrip replacement
Goto Forum:
  


Current Time: Sat Sep 28 15:55:04 CDT 2024

Total time taken to generate the page: 0.00808 seconds