GMCforum: GMCnet » [GMCnet] motor and transmission removal

Home » Public Forums » GMCnet » [GMCnet] motor and transmission removal

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] motor and transmission removal [message #168910 is a reply to message #168897]

Tue, 08 May 2012 11:28

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma:

Senior Member

Yes, I'd definitely recommend a fiberglass shroud. It will route all of
the air passing through the radiator to the fan, which I consider an
advantage. If it's split horizontally, removing just a few bolts will
allow you to remove just the bottom half for access to the fan belts and
water pump when they inevitably need attention.

Ken H.

On Tue, May 8, 2012 at 10:57 AM, cameron wrote:

> Ken
> Thanks for the information
> So you would recomend replacing the stock shroud and getting a split one?
> Just want to make sure before I drop down another $200.00
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

[Message index]

		[GMCnet] motor and transmission removal By: Cameron Hong on Wed, 28 December 2011 15:51
		Re: [GMCnet] motor and transmission removal By: cameron on Wed, 28 December 2011 17:05
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 17:28
		Re: [GMCnet] motor and transmission removal By: Bob de Kruyff on Wed, 28 December 2011 18:30
		Re: [GMCnet] motor and transmission removal By: ljdavick on Wed, 28 December 2011 19:04
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 20:04
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 17:15
		Re: [GMCnet] motor and transmission removal By: cameron on Wed, 28 December 2011 17:27
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 17:31
		Re: [GMCnet] motor and transmission removal By: jimk on Fri, 30 December 2011 22:29
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Fri, 30 December 2011 23:18
		Re: [GMCnet] motor and transmission removal By: g.winger on Wed, 28 December 2011 19:04
		Re: [GMCnet] motor and transmission removal By: cameron on Fri, 30 December 2011 16:43
		Re: [GMCnet] motor and transmission removal By: Ken Burton on Sat, 31 December 2011 01:54
		Re: [GMCnet] motor and transmission removal By: Mr ERFisher on Sat, 31 December 2011 08:45
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Sat, 31 December 2011 09:45
		Re: [GMCnet] motor and transmission removal By: jimk on Sat, 31 December 2011 12:00
		Re: [GMCnet] motor and transmission removal By: cameron on Tue, 08 May 2012 09:57
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 11:28
		Re: [GMCnet] motor and transmission removal By: GMC_LES on Tue, 08 May 2012 15:13
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 19:39
		Re: [GMCnet] motor and transmission removal By: mike miller on Tue, 08 May 2012 11:34
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 11:51
		Re: [GMCnet] motor and transmission removal By: Jp Benson on Tue, 08 May 2012 14:33
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 19:34
		Re: [GMCnet] motor and transmission removal By: midlf on Thu, 10 May 2012 19:15
		Re: [GMCnet] motor and transmission removal By: mike miller on Thu, 10 May 2012 19:48
		Re: [GMCnet] motor and transmission removal By: Ken Burton on Fri, 11 May 2012 15:38
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Wed, 28 December 2011 19:12
		Re: [GMCnet] motor and transmission removal By: KB on Wed, 28 December 2011 20:05
		Re: [GMCnet] motor and transmission removal By: Bob de Kruyff on Wed, 28 December 2011 20:18
		Re: [GMCnet] motor and transmission removal By: USAussie on Wed, 28 December 2011 20:35
		Re: [GMCnet] motor and transmission removal By: Dolph Santorine on Wed, 28 December 2011 21:49
		Re: [GMCnet] motor and transmission removal By: jhbridges on Thu, 29 December 2011 12:56
		Re: [GMCnet] motor and transmission removal By: USAussie on Thu, 29 December 2011 16:18
		Re: [GMCnet] motor and transmission removal By: jhbridges on Thu, 29 December 2011 16:52
		Re: [GMCnet] motor and transmission removal By: USAussie on Thu, 29 December 2011 17:09
		Re: [GMCnet] motor and transmission removal By: cameron on Fri, 30 December 2011 16:47
		Re: [GMCnet] motor and transmission removal By: Larry on Wed, 28 December 2011 22:23
		Re: [GMCnet] motor and transmission removal By: Larry on Wed, 28 December 2011 22:26
		Re: [GMCnet] motor and transmission removal By: Mr ERFisher on Thu, 29 December 2011 05:57
		Re: [GMCnet] motor and transmission removal By: Bruce Hart on Thu, 29 December 2011 14:46
		Re: [GMCnet] motor and transmission removal By: Frank Condos on Thu, 29 December 2011 18:00
		Re: [GMCnet] motor and transmission removal By: cameron on Fri, 30 December 2011 17:06
		Re: [GMCnet] motor and transmission removal By: USAussie on Fri, 30 December 2011 18:10
		Re: [GMCnet] motor and transmission removal By: stkhlm on Thu, 29 December 2011 19:00
		Re: [GMCnet] motor and transmission removal By: Bruce Hart on Thu, 29 December 2011 23:03
		Re: [GMCnet] motor and transmission removal By: stkhlm on Fri, 30 December 2011 19:29
		Re: [GMCnet] motor and transmission removal By: cameron on Mon, 07 May 2012 18:08
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Mon, 07 May 2012 18:16
		Re: [GMCnet] motor and transmission removal By: PettyVTX on Thu, 10 May 2012 19:18
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Thu, 10 May 2012 19:32
		Re: [GMCnet] motor and transmission removal By: jhbridges on Fri, 11 May 2012 06:57

Previous Topic:	Windshield installer on east coast
Next Topic:	Sliding window weatherstrip replacement

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Jun 28 15:36:55 CDT 2024

Total time taken to generate the page: 0.00653 seconds