GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » paint sticking problem ???
Re: [GMCnet] paint sticking problem ??? [message #163846 is a reply to message #163831] Thu, 22 March 2012 11:05 Go to previous messageGo to previous message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma:
Senior Member
No primer is necessary with that SEM trim paint. You will not be
disappointed in the appearance, ease of application, or the durability.

On Thu, Mar 22, 2012 at 7:14 AM, sgltrac <sgltrac@gmail.com> wrote:

>
>
> I agree with Steve F. If you are not taking the windows out and apart I
> would prep with wet sanding paper, clean with detergent based cleaner and
> follow with a chemical cleaner such as DX330(ppg product). Etch primers
> work very well when properly applied but proper application is not simple.
> If your film thickness is too thin the film fails. If your film thickness
> is too thick then the film delaminates from its self. If the grit used to
> rough the metal is too rough the etch primer can fail. Use a decent
> automotive grade spray epoxy primer(available in black) and finish with SEM
> trim paint. Make sure the paint is warm and well mixed and the window
> frames are warm as well. If the frames are out and apart I would visit the
> powder coater.
>
> jwid
> --
> Sully
> 77 Royale basket case.
> Future motorhome land speed record holder(bucket list)
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Fathom the hypocrisy of a nation where every citizen must prove they have
health insurance......but not everyone has to prove they're a citizen.
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Cam Timing
Next Topic: [GMCnet] alcoa rockstar wheels?
Goto Forum:
  


Current Time: Sun Jun 30 13:45:06 CDT 2024

Total time taken to generate the page: 0.04168 seconds