GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] motor and transmission removal
Re: [GMCnet] motor and transmission removal [message #154879 is a reply to message #154689] Fri, 30 December 2011 22:29 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
Camron,
If you do not have a trolley hoist, drop the transmission down , then
the engine,
You do not have to dig ,,holes.
Need more details, call me as we are only Miles from you in Fremont,CA.




On Wed, Dec 28, 2011 at 3:31 PM, Howard and Sue <hnielsen2@cox.net> wrote:
> Cameron;
> Ours was up on a hoist when we dropped the engine and drive unit.
> Check out the GMC sites for information on how high to lift your motor home.
> Howard
> ----- Original Message -----
> From: "cameron" <cameron.hong@comcast.net>
> To: <gmclist@temp.gmcnet.org>
> Sent: Wednesday, December 28, 2011 15:27
> Subject: Re: [GMCnet] motor and transmission removal
>
>
>>
>>
>> I am in Castro Valley CA. just east of SF
>> So you recommend dropping out the bottom.
>> That looked like a good idea but how high do I need to jack the rig up?
>> I was looking around and one guy dug a 3' hole to get his out.
>> I was thinking that since I am removing the transmission and the engine
>> the front would work but if dropping out the bottom is easier, then it
>> sounds good to me.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Windshield installer on east coast
Next Topic: Sliding window weatherstrip replacement
Goto Forum:
  


Current Time: Fri Jun 28 15:37:24 CDT 2024

Total time taken to generate the page: 0.01562 seconds