| Re: [GMCnet] Windshield wiper arm [message #140149 is a reply to message #140138] |
Sat, 20 August 2011 00:16   |
sgltrac
Messages: 2797
Registered: April 2011
Karma:
|
Senior Member |
|
|
After removing the nut raise the wiper up as far as you can get to 90 degrees then rock the long part with the blade(now pointing in your face) vertically up and down while pulling up on the backside of arm(opposite side of arm). Try not to fly off backward when it let's go(check your landing zone)
Sully
77 royale
------Original Message------
From: Serge Leduc
Sender: gmclist-bounces@temp.gmcnet.org
To: gmclist@gmcnet.org
ReplyTo: gmclist@temp.gmcnet.org
Subject: [GMCnet] Windshield wiper arm
Sent: Aug 19, 2011 8:47 PM
I have been trying to remove the complete windshield wiper arm, I have taken
the nut off and expected to just pull it straight up, that was not the case,
I have pried with a wonder bar and twisted to no avail, is there a secret
and am I missing something?
Would appreciate any advice before I break something off.
Serge
1973 GMC
Deming, NM
He who expects no gratitude shall never be disapointed
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sent from my Verizon Wireless BlackBerry
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
