Transmode Construcion... [message #99223] |
Fri, 10 September 2010 08:51 |
Benny Hill
Messages: 18 Registered: August 2010
Karma:
|
Junior Member |
|
|
When a transmode was shipped to an outfitter like Coachman what did they get?
Were the side windows and roof top accesories installed by GM or did Coachman cut in the window holes from a slab side transmode?
My reason for asking is, that if you look down the sides of my coach the aluminum skin around the window openings is really wavy and crude. Also my vertical aluminum joints have become unglued on both sides just above the belt line molding on both sides about 8" in length. How many others have seen this with a 1976 or newer coach?
I was thinking that the reason this aluminum skin has become unglued was a result of sloppy Coachman outfitting. I really do not want to gut the inside walls to investigate if it is only a cosmetic problem.
A GMC expert told me how to re-glue the aluminum skin but I am still concerned about what may be going on inside the wall causing all of this.
Benny Hill
Shopping for a GMC
Florida
|
|
|