GMC AC compressor tools -- photo album -- [message #98951] |
Wed, 08 September 2010 08:52 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
In an effort to capture information on the ac compressor tools that are used for the clutch R/R I am working on a photo album.
I did not want to duplicate anything that has been done -- when I did the project I found info in a number of different places.
Not finished as I still need to photo the special tool required to reinstall the outer clutch plate.
It took me a fair amount of time/trips to gather all that was needed so hopefully this will spare someone else.
Would appreciate any input edits as it is a work in process.
Thanks,
Dennis
http://www.gmcmhphotos.com/photos/showphoto.php?photo=35770&title=ac-compressor-clutch-face-plate&cat=5593
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
Re: GMC AC compressor tools -- photo album -- [message #99001 is a reply to message #98951] |
Wed, 08 September 2010 13:46 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
With input from BobB I have made some edits and added the last special tool required to press the clutch plate back onto the AC compressor shaft. Along with part number and sources I have added current prices. Note that several of the tools are available for loan from AutoZone with a deposit -- equivalent to the sale price. Most of the tools were new -- not many people undertaking this task? -- except for the large puller. Not all stores have all tools.
The maintenance manual has a nice write-up, but the tools are all GM numbers.
Setting the air gap between the clutches was a little fuzzy -- I set it at .020 inch using feeler gauges.
Any further suggestions -- please let me know.
Dennis
Dennis S wrote on Wed, 08 September 2010 08:52 | In an effort to capture information on the ac compressor tools that are used for the clutch R/R I am working on a photo album.
I did not want to duplicate anything that has been done -- when I did the project I found info in a number of different places.
Not finished as I still need to photo the special tool required to reinstall the outer clutch plate.
It took me a fair amount of time/trips to gather all that was needed so hopefully this will spare someone else.
Would appreciate any input edits as it is a work in process.
Thanks,
Dennis
http://www.gmcmhphotos.com/photos/showphoto.php?photo=35770&title=ac-compressor-clutch-face-plate&cat=5593
|
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|