[GMCnet] O Ring [message #98659] |
Sun, 05 September 2010 15:14 |
paul h cashman
Messages: 176 Registered: May 2005
Karma:
|
Senior Member |
|
|
Hi All,
Before installing my new Transmission Filter ,I thought ,I would check ,the
Manual.
The Manual says ,to install one O rind in the Bore ,then install the Filter
When I removed the old Filter ,one O Ring was on the Filter and the other
one was in the Bore.
On other ,Automobile.Transmission Filters I have worked on,the O rings were
always installed on the Filter.
Is Manny saying to put both O Rings in the bore first,then drive the Filter
through the O Rings,or just butt it up, till it makes contact with the O
Rings.?
Thanks.
Paul Cashman
Riverdale GA
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Paul H Cashman
Riverdale Ga
1978 Transmode
1975 Corvette
1978 Beetle Convertible
1989 Harley Davidson Sportster
|
|
|