GMCforum: GMCnet » Onan/Petronix ignition Ken H.

Home » Public Forums » GMCnet » Onan/Petronix ignition Ken H.

Show: Today's Messages :: Polls :: Message Navigator

Onan/Petronix ignition Ken H. [message #98610]

Sun, 05 September 2010 07:23

fred v

Messages: 999
Registered: April 2006
Location: pensacola, fl.

Karma:

Senior Member

Ken; John and i were doing this conversion to his Onan and on this page:
http://www.gmcmhphotos.com/photos/showphoto.php?photo=6804&cat=3608
you say to remove the wire from the + side of the coil to the points. on his the points were connected to the - side of the coil. 12 v + connects to the + side of the coil.

which way is correct?

we were unable to get the module to spark the plug lead. should the flat side of the module face the magnet or the 3 angle side of the module?

why do you ground one of the spark leads to test the set up?
thanks,

Fred V
'77 Royale RB 455
P'cola, Fl

Report message to a moderator

[Message index]

		Onan/Petronix ignition Ken H. By: fred v on Sun, 05 September 2010 07:23
		Re: Onan/Petronix ignition Ken H. By: fred v on Sun, 05 September 2010 07:30
		Re: [GMCnet] Onan/Petronix ignition Ken H. By: Ken Henderson on Sun, 05 September 2010 08:02
		Re: [GMCnet] Onan/Petronix ignition Ken H. By: Ken Henderson on Sun, 05 September 2010 08:15
		Re: Onan/Petronix ignition Ken H. By: mike miller on Sun, 05 September 2010 08:17
		Re: Onan/Petronix ignition Ken H. By: fred v on Sun, 05 September 2010 10:06
		Re: Onan/Petronix ignition Ken H. By: fred v on Mon, 06 September 2010 08:18

Previous Topic:	[GMCnet] Friend looking for a finished coach
Next Topic:	"Found" GMC in Delaware

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Sep 24 03:25:18 CDT 2024

Total time taken to generate the page: 0.00673 seconds