GMCforum: GMCnet » [GMCnet] O Rings

Home » Public Forums » GMCnet » [GMCnet] O Rings

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] O Rings [message #98281]

Thu, 02 September 2010 19:33

paul h cashman

Messages: 176
Registered: May 2005

Karma:

Senior Member

Hi All,
On removing my Transmission Filter ,I found the O ring was installed
improperly ,the O ring was installed over the Stop, 1/2 half on each side of
the stop, it was distorted ,and couldn't be used again.
My question is does anyone know, why Many says to use the ,old O ring with
the new one?
All the O ring does is make a seal, so all the Oil goes through the filter
.
How can two be better than one
I have heard of using two Rubbers before ,but I said the Hell with that.
Paul Cashman
Riverdale GA.

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Paul H Cashman Riverdale Ga 1978 Transmode 1975 Corvette 1978 Beetle Convertible 1989 Harley Davidson Sportster

Report message to a moderator

[Message index]

		[GMCnet] O Rings By: paul h cashman on Thu, 02 September 2010 19:33
		Re: [GMCnet] O Rings By: John Sharpe on Thu, 02 September 2010 21:16
		Re: [GMCnet] O Rings By: jimk on Fri, 03 September 2010 12:11

Previous Topic:	Alcoa Lug nuts
Next Topic:	[GMCnet] O Ring

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 02:22:16 CDT 2024

Total time taken to generate the page: 0.00758 seconds