GMCforum: GMCnet » Hello,It's Me again...

Home » Public Forums » GMCnet » Hello,It's Me again...

Show: Today's Messages :: Polls :: Message Navigator

Hello,It's Me again... [message #98237]

Thu, 02 September 2010 14:45

RUN GMC

Messages: 26
Registered: August 2010
Location: Connecticut

Karma:

Junior Member

It's has come time to put the $$$ where my mouth is...All advice needed and appreciated.

#1-How do I remove the WETBATH and Cabinets from the stove back to replace the floor?

#2-What are the materials that I will need to complete this project? (Best type of plywood,screws,bolts,insulation,e.t.c)

#3- What are some of the other upgrades I should do at same time?

I really don't have an idea if I am asking the proper questions,so if there's something I should know,PLEASE let me know!

Attached is link to floor that need to be replaced.

As always...Thanks in Advance.

http://www.gmcmhphotos.com/photos/showphoto.php?photo=35691&title=all-the-rot&cat=5566

RUN GMC a 1978 GMC ELEGANZA II. "Gentlemen, we can rebuild it. We have the technology. We have the capability to rebuild the world's only complete motorhome built by a major auto/truck manufacturer RUN GMC will be that rv; Better, stronger, faster."

Report message to a moderator

[Message index]

		Hello,It's Me again... By: RUN GMC on Thu, 02 September 2010 14:45
		Re: Hello,It's Me again... By: Chr$ on Thu, 02 September 2010 14:54
		Re: Hello,It's Me again... By: Chr$ on Thu, 02 September 2010 14:56
		Re: Hello,It's Me again... By: Dennis S on Thu, 02 September 2010 15:09
		Re: Hello,It's Me again... By: gmchunter on Thu, 02 September 2010 19:18
		Re: Hello,It's Me again... By: ljdavick on Thu, 02 September 2010 19:22
		Re: [GMCnet] Hello,It's Me again... By: jw mills on Tue, 14 September 2010 14:24
		Re: [GMCnet] Hello,It's Me again... By: Bob de Kruyff on Tue, 14 September 2010 14:32
		Re: [GMCnet] Hello,It's Me again... By: jw mills on Tue, 14 September 2010 17:14
		Re: [GMCnet] Hello,It's Me again... By: peter bailey on Thu, 02 September 2010 19:37
		Re: Hello,It's Me again... By: zhagrieb on Tue, 14 September 2010 15:07

Previous Topic:	installing new control valves
Next Topic:	Interior Side panels

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 16:24:37 CDT 2024

Total time taken to generate the page: 0.02895 seconds