GMCforum: GMCnet » making transmission lines ?

Home » Public Forums » GMCnet » making transmission lines ?

Show: Today's Messages :: Polls :: Message Navigator

making transmission lines ? [message #97286]

Thu, 26 August 2010 10:29

hertfordnc

Messages: 1164
Registered: September 2009
Location: East NC

Karma:

Senior Member

THe transmission lines on the Revcon need to be replaced.

I'm pretty sure the ready made lines from Applied GMC would still need to be modified to fit the REVCON

I can bend tubing and i can make a decent flare, but it never hurts to ask because we don't always know what we don't know.

dave

Report message to a moderator

[Message index]

		making transmission lines ? By: hertfordnc on Thu, 26 August 2010 10:29
		Re: making transmission lines ? By: Rusty on Thu, 26 August 2010 10:45
		Re: making transmission lines ? By: fred v on Thu, 26 August 2010 10:56
		Re: making transmission lines ? By: g.winger on Thu, 26 August 2010 11:40
		Re: making transmission lines ? By: zhagrieb on Thu, 26 August 2010 12:32

Previous Topic:	[GMCnet] Power distribution using circuit breakers
Next Topic:	[GMCnet] 403 engine, rebuild or replace with ?

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 21 02:53:02 CDT 2024

Total time taken to generate the page: 0.00884 seconds