How thick are the body pads on a '77? [message #94284] |
Mon, 02 August 2010 07:40 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma:
|
Senior Member |
|
|
A number of the body pads are missing on my 77 pb.
After searching the only info I found as to the thickness is "thin" as opposed to the "thick" early one piece pad.
How thick should they be? I'm considering cutting them from a mud flap from an 18 wheeler, or a rubber mat of similar construction, would these work? Whats left of the originals looks like they might have 3/8"?
The manual also shows what looks like 2 stacked at the bogie. I can't see where this one is.
Thanks guys
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|