Home » Public Forums » GMCnet » [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2)
| [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93419] |
Tue, 27 July 2010 07:12  |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Well, after George Beckman, drove his beautiful GMC into the lot and we all
met his lovely wife Ruth ( she went off to the docks for a walking tour
with JR's daughter) and we shot the shit with John, we were off to install
the EBL on JR's GMC, JR already had the Howell running. ( Everyone should
have a GeorgeB to help them install their EBL-s).
Jr's laptop, loaded the EBL software, found the USB SERIAL port and we were
ready to go. OOPs, had to down load the flash-update, or Heads up monitor
(forgot which) using JR's wifi link to his house data-access point . The
laptop battery was bad, but no problem used JR's 110 inverter to power the
laptop to do the wifi down-load (phew). Connected the laptop, through the
usb-serial port to the EBL, plugged in the ECM, did the update, and it all
ran the first time (every one should have a GeorgeB to get them started)
But wait, after consulting by cell phone,with Randy, (in Texas) it was
determined we need a bin from randy and he could send it to GeorgeB on
email. So George got his laptop(apple) , in Jr's coach, connected to
George's coach through his Verizon, wifi , data connection which also drives
his iPAD up-front display for his EBL. (is this impressive or what?????)
George sent it to JR's laptop via email, through JR's wifi from the house,
and we were ready for George to patch the EBL because JR does not have a
ESC, or electronic dist. (I am barely able to keep up here). Error light
came on the efi computer( while running the engine and watching the
heads-up display) , George plugged in his OBDII connector and read the
lights to see the error code 23, which he went back and patched the EBL bin
with the update software (OMG) to ignore the input manifold temp sensor (we
don't have).
Now it all works, and I got a call from my wife wondering if I was ever
going to come home, and George and Jr, were in an intensive training session
on the EBL system ( did I say everyone needs a GeorgeB to help them install
their EBL, system), so I had to leave them doing the good stuff and I went
home.
Got a call at 9PM from a gal in So-Cal (how did she get my name?) that wants
me to break into her house, here in GreenTrees Village, copy off her
Quickbooks records, and email the file to her so she can do her taxes. ( I
said tomorrow)
Phew - what a day, it is tough being an old retired puke, just trying to
keep up.
gene
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93423 is a reply to message #93419] |
Tue, 27 July 2010 07:25  |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Gene,
Keep up the easy way with one three syllable word....
car bur etor.
On Tue, Jul 27, 2010 at 5:12 AM, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
> Well, after George Beckman, drove his beautiful GMC into the lot and we all
> met his lovely wife Ruth ( she went off to the docks for a walking tour
> with JR's daughter) and we shot the shit with John, we were off to install
> the EBL on JR's GMC, JR already had the Howell running. ( Everyone should
> have a GeorgeB to help them install their EBL-s).
>
> Jr's laptop, loaded the EBL software, found the USB SERIAL port and we were
> ready to go. OOPs, had to down load the flash-update, or Heads up monitor
> (forgot which) using JR's wifi link to his house data-access point . The
> laptop battery was bad, but no problem used JR's 110 inverter to power the
> laptop to do the wifi down-load (phew). Connected the laptop, through the
> usb-serial port to the EBL, plugged in the ECM, did the update, and it all
> ran the first time (every one should have a GeorgeB to get them started)
>
> But wait, after consulting by cell phone,with Randy, (in Texas) it was
> determined we need a bin from randy and he could send it to GeorgeB on
> email. So George got his laptop(apple) , in Jr's coach, connected to
> George's coach through his Verizon, wifi , data connection which also drives
> his iPAD up-front display for his EBL. (is this impressive or what?????)
> George sent it to JR's laptop via email, through JR's wifi from the house,
> and we were ready for George to patch the EBL because JR does not have a
> ESC, or electronic dist. (I am barely able to keep up here). Error light
> came on the efi computer( while running the engine and watching the
> heads-up display) , George plugged in his OBDII connector and read the
> lights to see the error code 23, which he went back and patched the EBL bin
> with the update software (OMG) to ignore the input manifold temp sensor (we
> don't have).
>
> Now it all works, and I got a call from my wife wondering if I was ever
> going to come home, and George and Jr, were in an intensive training session
> on the EBL system ( did I say everyone needs a GeorgeB to help them install
> their EBL, system), so I had to leave them doing the good stuff and I went
> home.
>
> Got a call at 9PM from a gal in So-Cal (how did she get my name?) that wants
> me to break into her house, here in GreenTrees Village, copy off her
> Quickbooks records, and email the file to her so she can do her taxes. ( I
> said tomorrow)
>
> Phew - what a day, it is tough being an old retired puke, just trying to
> keep up.
>
> gene
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93424 is a reply to message #93423] |
Tue, 27 July 2010 07:27 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
The fun was all of the other technology,
gene
On Tue, Jul 27, 2010 at 5:25 AM, Steven Ferguson <botiemad11@gmail.com>wrote:
> Gene,
> Keep up the easy way with one three syllable word....
> car bur etor.
>
>
> On Tue, Jul 27, 2010 at 5:12 AM, Mr.erf ERFisher <mr.erfisher@gmail.com>
> wrote:
> > Well, after George Beckman, drove his beautiful GMC into the lot and we
> all
> > met his lovely wife Ruth ( she went off to the docks for a walking tour
> > with JR's daughter) and we shot the shit with John, we were off to
> install
> > the EBL on JR's GMC, JR already had the Howell running. ( Everyone
> should
> > have a GeorgeB to help them install their EBL-s).
> >
> > Jr's laptop, loaded the EBL software, found the USB SERIAL port and we
> were
> > ready to go. OOPs, had to down load the flash-update, or Heads up
> monitor
> > (forgot which) using JR's wifi link to his house data-access point . The
> > laptop battery was bad, but no problem used JR's 110 inverter to power
> the
> > laptop to do the wifi down-load (phew). Connected the laptop, through
> the
> > usb-serial port to the EBL, plugged in the ECM, did the update, and it
> all
> > ran the first time (every one should have a GeorgeB to get them started)
> >
> > But wait, after consulting by cell phone,with Randy, (in Texas) it was
> > determined we need a bin from randy and he could send it to GeorgeB on
> > email. So George got his laptop(apple) , in Jr's coach, connected to
> > George's coach through his Verizon, wifi , data connection which also
> drives
> > his iPAD up-front display for his EBL. (is this impressive or what?????)
> > George sent it to JR's laptop via email, through JR's wifi from the
> house,
> > and we were ready for George to patch the EBL because JR does not have a
> > ESC, or electronic dist. (I am barely able to keep up here). Error light
> > came on the efi computer( while running the engine and watching the
> > heads-up display) , George plugged in his OBDII connector and read the
> > lights to see the error code 23, which he went back and patched the EBL
> bin
> > with the update software (OMG) to ignore the input manifold temp sensor
> (we
> > don't have).
> >
> > Now it all works, and I got a call from my wife wondering if I was ever
> > going to come home, and George and Jr, were in an intensive training
> session
> > on the EBL system ( did I say everyone needs a GeorgeB to help them
> install
> > their EBL, system), so I had to leave them doing the good stuff and I
> went
> > home.
> >
> > Got a call at 9PM from a gal in So-Cal (how did she get my name?) that
> wants
> > me to break into her house, here in GreenTrees Village, copy off her
> > Quickbooks records, and email the file to her so she can do her taxes. (
> I
> > said tomorrow)
> >
> > Phew - what a day, it is tough being an old retired puke, just trying to
> > keep up.
> >
> > gene
> >
> > --
> > Gene Fisher -- 74-23,77PB/ore/ca
> > “Give a man a fish; you have fed him for today --- give him a URL and
> > -------
> > http://gmcmotorhome.info/
> > Alternator Protection Cable
> > http://gmcmotorhome.info/APC.html
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Steve Ferguson
> '76 EII
> Sierra Vista, AZ
> Urethane bushing source
> www.bdub.net/ferguson/
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93425 is a reply to message #93424] |
Tue, 27 July 2010 07:31 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
are we going to talk about power springs (we no longer have) or the leaking
plugs in the bottom of the Quadrajets, we can no longer get to send to
Patterson for a $400 rebuild?
or
the float bowls that are boiling over, or the isolation gaskets we need to
add, or the input filters we need to remove, or the carb ovens that are
leaking.
we won't talk about SOB injector systems ;>)
(I hate carbs;>)
gene
On Tue, Jul 27, 2010 at 5:27 AM, Mr.erf ERFisher <mr.erfisher@gmail.com>wrote:
> The fun was all of the other technology,
>
> gene
>
>
>
>
> On Tue, Jul 27, 2010 at 5:25 AM, Steven Ferguson <botiemad11@gmail.com>wrote:
>
>> Gene,
>> Keep up the easy way with one three syllable word....
>> car bur etor.
>>
>>
>> On Tue, Jul 27, 2010 at 5:12 AM, Mr.erf ERFisher <mr.erfisher@gmail.com>
>> wrote:
>> > Well, after George Beckman, drove his beautiful GMC into the lot and we
>> all
>> > met his lovely wife Ruth ( she went off to the docks for a walking tour
>> > with JR's daughter) and we shot the shit with John, we were off to
>> install
>> > the EBL on JR's GMC, JR already had the Howell running. ( Everyone
>> should
>> > have a GeorgeB to help them install their EBL-s).
>> >
>> > Jr's laptop, loaded the EBL software, found the USB SERIAL port and we
>> were
>> > ready to go. OOPs, had to down load the flash-update, or Heads up
>> monitor
>> > (forgot which) using JR's wifi link to his house data-access point .
>> The
>> > laptop battery was bad, but no problem used JR's 110 inverter to power
>> the
>> > laptop to do the wifi down-load (phew). Connected the laptop, through
>> the
>> > usb-serial port to the EBL, plugged in the ECM, did the update, and it
>> all
>> > ran the first time (every one should have a GeorgeB to get them started)
>> >
>> > But wait, after consulting by cell phone,with Randy, (in Texas) it was
>> > determined we need a bin from randy and he could send it to GeorgeB on
>> > email. So George got his laptop(apple) , in Jr's coach, connected to
>> > George's coach through his Verizon, wifi , data connection which also
>> drives
>> > his iPAD up-front display for his EBL. (is this impressive or what?????)
>> > George sent it to JR's laptop via email, through JR's wifi from the
>> house,
>> > and we were ready for George to patch the EBL because JR does not have a
>> > ESC, or electronic dist. (I am barely able to keep up here). Error
>> light
>> > came on the efi computer( while running the engine and watching the
>> > heads-up display) , George plugged in his OBDII connector and read the
>> > lights to see the error code 23, which he went back and patched the EBL
>> bin
>> > with the update software (OMG) to ignore the input manifold temp sensor
>> (we
>> > don't have).
>> >
>> > Now it all works, and I got a call from my wife wondering if I was ever
>> > going to come home, and George and Jr, were in an intensive training
>> session
>> > on the EBL system ( did I say everyone needs a GeorgeB to help them
>> install
>> > their EBL, system), so I had to leave them doing the good stuff and I
>> went
>> > home.
>> >
>> > Got a call at 9PM from a gal in So-Cal (how did she get my name?) that
>> wants
>> > me to break into her house, here in GreenTrees Village, copy off her
>> > Quickbooks records, and email the file to her so she can do her taxes. (
>> I
>> > said tomorrow)
>> >
>> > Phew - what a day, it is tough being an old retired puke, just trying to
>> > keep up.
>> >
>> > gene
>> >
>> > --
>> > Gene Fisher -- 74-23,77PB/ore/ca
>> > “Give a man a fish; you have fed him for today --- give him a URL and
>> > -------
>> > http://gmcmotorhome.info/
>> > Alternator Protection Cable
>> > http://gmcmotorhome.info/APC.html
>> > _______________________________________________
>> > GMCnet mailing list
>> > List Information and Subscription Options:
>> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>> >
>>
>>
>>
>> --
>> Steve Ferguson
>> '76 EII
>> Sierra Vista, AZ
>> Urethane bushing source
>> www.bdub.net/ferguson/
>> _______________________________________________
>> GMCnet mailing list
>> List Information and Subscription Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
| Re: [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93454 is a reply to message #93443] |
Tue, 27 July 2010 11:08 |
rvanwin
Messages: 325
Registered: April 2007
Location: Battlefield, MO
Karma: 6
|
Senior Member |
|
|
| WD0AFQ wrote on Tue, 27 July 2010 10:16 |
Sure wish I had George here when I upgrade my fuel injection. Maybe I can run over to Randy's in Springfield.
Dan
|
Anytime. Barn is open. Max is coming over Thursday and we are going to do a little alignment work on his coach. Wish I had been in OR with the gang doing JR's upgrade. We are going to be in CA in August - Margie's family reunion. Fast trip so not taking the coach this time.
Randy & Margie
'77 Eleganza II '403'
Battlefield, MO
|
|
|
|
| Re: [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93550 is a reply to message #93424] |
Tue, 27 July 2010 18:27 |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Soooo,
Are you going to have anything to share with the GMCWS follks this
fall? Maybe some of all this technology?
On Tue, Jul 27, 2010 at 5:27 AM, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
> The fun was all of the other technology,
>
> gene
>
>
>
> On Tue, Jul 27, 2010 at 5:25 AM, Steven Ferguson <botiemad11@gmail.com>wrote:
>
>> Gene,
>> Keep up the easy way with one three syllable word....
>> car bur etor.
>>
>>
>> On Tue, Jul 27, 2010 at 5:12 AM, Mr.erf ERFisher <mr.erfisher@gmail.com>
>> wrote:
>> > Well, after George Beckman, drove his beautiful GMC into the lot and we
>> all
>> > met his lovely wife Ruth ( she went off to the docks for a walking tour
>> > with JR's daughter) and we shot the shit with John, we were off to
>> install
>> > the EBL on JR's GMC, JR already had the Howell running. ( Everyone
>> should
>> > have a GeorgeB to help them install their EBL-s).
>> >
>> > Jr's laptop, loaded the EBL software, found the USB SERIAL port and we
>> were
>> > ready to go. OOPs, had to down load the flash-update, or Heads up
>> monitor
>> > (forgot which) using JR's wifi link to his house data-access point . The
>> > laptop battery was bad, but no problem used JR's 110 inverter to power
>> the
>> > laptop to do the wifi down-load (phew). Connected the laptop, through
>> the
>> > usb-serial port to the EBL, plugged in the ECM, did the update, and it
>> all
>> > ran the first time (every one should have a GeorgeB to get them started)
>> >
>> > But wait, after consulting by cell phone,with Randy, (in Texas) it was
>> > determined we need a bin from randy and he could send it to GeorgeB on
>> > email. So George got his laptop(apple) , in Jr's coach, connected to
>> > George's coach through his Verizon, wifi , data connection which also
>> drives
>> > his iPAD up-front display for his EBL. (is this impressive or what?????)
>> > George sent it to JR's laptop via email, through JR's wifi from the
>> house,
>> > and we were ready for George to patch the EBL because JR does not have a
>> > ESC, or electronic dist. (I am barely able to keep up here). Error light
>> > came on the efi computer( while running the engine and watching the
>> > heads-up display) , George plugged in his OBDII connector and read the
>> > lights to see the error code 23, which he went back and patched the EBL
>> bin
>> > with the update software (OMG) to ignore the input manifold temp sensor
>> (we
>> > don't have).
>> >
>> > Now it all works, and I got a call from my wife wondering if I was ever
>> > going to come home, and George and Jr, were in an intensive training
>> session
>> > on the EBL system ( did I say everyone needs a GeorgeB to help them
>> install
>> > their EBL, system), so I had to leave them doing the good stuff and I
>> went
>> > home.
>> >
>> > Got a call at 9PM from a gal in So-Cal (how did she get my name?) that
>> wants
>> > me to break into her house, here in GreenTrees Village, copy off her
>> > Quickbooks records, and email the file to her so she can do her taxes. (
>> I
>> > said tomorrow)
>> >
>> > Phew - what a day, it is tough being an old retired puke, just trying to
>> > keep up.
>> >
>> > gene
>> >
>> > --
>> > Gene Fisher -- 74-23,77PB/ore/ca
>> > “Give a man a fish; you have fed him for today --- give him a URL and
>> > -------
>> > http://gmcmotorhome.info/
>> > Alternator Protection Cable
>> > http://gmcmotorhome.info/APC.html
>> > _______________________________________________
>> > GMCnet mailing list
>> > List Information and Subscription Options:
>> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>> >
>>
>>
>>
>> --
>> Steve Ferguson
>> '76 EII
>> Sierra Vista, AZ
>> Urethane bushing source
>> www.bdub.net/ferguson/
>> _______________________________________________
>> GMCnet mailing list
>> List Information and Subscription Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93951 is a reply to message #93550] |
Fri, 30 July 2010 03:35 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
not sure if you were talking to me??
but
I am trying to get to LV, wife does not want to go, Manny wants me to
drive, I want to take 23 on a shake down trip (not done tho)---
thinking , thinking
I like the EBL stuff, but not sure it is good to work the whole GMCMI around
it. I think less than 1 % (80 coaches) will ever go to it. I am sure the
Dick Patterson, JimB, SteveF, route (carburetors ;>) will be the route for
the majority.
the talks I would like to give/see at the GMCWS are:
"Fixing the Skin you are in"
which is about how to repair all of the materials that are on the GMC. I
have a web page on this, (not on line yet) but the masters of this are
Emery, and Faye.
"How to find those battery leaks"
ways to trouble search the little current leaks that cause most to
disconnect their batteries while in storage.
The things that are in everyone's future are your bushings, bearings, brakes
, coach mods, etc
Thanks for all of your work
gene
On Tue, Jul 27, 2010 at 4:27 PM, Steven Ferguson <botiemad11@gmail.com>wrote:
> Soooo,
> Are you going to have anything to share with the GMCWS follks this
> fall? Maybe some of all this technology?
>
> --
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] What a great day at JR's GMC emporium, on the Orgn coast.(part 2) [message #93962 is a reply to message #93951] |
Fri, 30 July 2010 07:29 |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Gene,
Yes, I was talking to you.
You are welcome to give any, and all of those if you wish. I like
your presentations and you always have answers to follow up questions.
I like the one "fixing the skin you are in" and the battery leaks are
a must.
EBL?
I will contact Bert & Faye and see if I can get a committment out of them.
On Fri, Jul 30, 2010 at 1:35 AM, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
> not sure if you were talking to me??
>
> but
>
> I am trying to get to LV, wife does not want to go, Manny wants me to
> drive, I want to take 23 on a shake down trip (not done tho)---
>
> thinking , thinking
>
> I like the EBL stuff, but not sure it is good to work the whole GMCMI around
> it. I think less than 1 % (80 coaches) will ever go to it. I am sure the
> Dick Patterson, JimB, SteveF, route (carburetors ;>) will be the route for
> the majority.
>
> the talks I would like to give/see at the GMCWS are:
>
> "Fixing the Skin you are in"
> which is about how to repair all of the materials that are on the GMC. I
> have a web page on this, (not on line yet) but the masters of this are
> Emery, and Faye.
>
> "How to find those battery leaks"
> ways to trouble search the little current leaks that cause most to
> disconnect their batteries while in storage.
>
> The things that are in everyone's future are your bushings, bearings, brakes
> , coach mods, etc
>
> Thanks for all of your work
> gene
>
>
> On Tue, Jul 27, 2010 at 4:27 PM, Steven Ferguson <botiemad11@gmail.com>wrote:
>
>> Soooo,
>> Are you going to have anything to share with the GMCWS follks this
>> fall? Maybe some of all this technology?
>>
>> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Tue Sep 24 20:39:00 CDT 2024
Total time taken to generate the page: 0.04024 seconds
|
GMCforum
Search
Help
Register
Login
Home
