Fuel Injection Help [message #93062] |
Sat, 24 July 2010 10:55 |
rowing guy
Messages: 31 Registered: October 2009 Location: Outside Philly
Karma:
|
Member |
|
|
Hello,
I am posting this for a fellow Revcon owner with some fuel injection issues. I'll paste his request below. So, if anyone has the calibration numbers, please let me know and I'll forward this information to him.
Thanks a bunch.
Scott
The Flying Brick
Quote: | We installed a Howell system a while back and have been having some issues with
dying/stalling etc.
On the road, visiting Kathy's friends in Long Island. Turns out the friend's
son is an old friend of Bob Raucher (sp?) at Dynamic EFI. They make
the 'Embedded Locker' system used by some Revcon (and apparently lots of GMC)
folks.
Long story short, we've spent the last week having our very basic
and troublesome Howell slowly morphed into a Dynamic EBL system with all the
bells & whistles, ie; VSS, knock sensor, HEI distributor, electronic spark
advance and even air intake temp sensor. (Taking it out for some 'VE Learn'
runs today).
Robert asked me to put this out to the gearheads in the group: Does anyone have
the calibration numbers for a Dynamic EFI - as installed in their rig (455ci)? He
figured someone has been running a coach and already has the best numbers. That
made sense to me. If anyone has - and could email -those calibrations we would
appreciate it.
|
|
|
|