Fuel Injection Help [message #93062] |
Sat, 24 July 2010 10:55 |
rowing guy
Messages: 31 Registered: October 2009 Location: Outside Philly
Karma: 0
|
Member |
|
|
Hello,
I am posting this for a fellow Revcon owner with some fuel injection issues. I'll paste his request below. So, if anyone has the calibration numbers, please let me know and I'll forward this information to him.
Thanks a bunch.
Scott
The Flying Brick
Quote: | We installed a Howell system a while back and have been having some issues with
dying/stalling etc.
On the road, visiting Kathy's friends in Long Island. Turns out the friend's
son is an old friend of Bob Raucher (sp?) at Dynamic EFI. They make
the 'Embedded Locker' system used by some Revcon (and apparently lots of GMC)
folks.
Long story short, we've spent the last week having our very basic
and troublesome Howell slowly morphed into a Dynamic EBL system with all the
bells & whistles, ie; VSS, knock sensor, HEI distributor, electronic spark
advance and even air intake temp sensor. (Taking it out for some 'VE Learn'
runs today).
Robert asked me to put this out to the gearheads in the group: Does anyone have
the calibration numbers for a Dynamic EFI - as installed in their rig (455ci)? He
figured someone has been running a coach and already has the best numbers. That
made sense to me. If anyone has - and could email -those calibrations we would
appreciate it.
|
|
|
|
Re: [GMCnet] Fuel Injection Help [message #93065 is a reply to message #93062] |
Sat, 24 July 2010 11:32 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Scott,
Tell your friend to check out our Google Group at
http://groups.google.com/group/gmcmh-efi/web
<http://groups.google.com/group/gmcmh-efi/web>If he doesn't find what he
needs there, contact me and I'll consider subscribing him to the group so he
can ask questions of the experts there.
Ken H.
Americus, GA
'76 X-Birchaven
www.gmcwipersetc.com
On Sat, Jul 24, 2010 at 11:55 AM, Scott Brown <sbrown928@comcast.net> wrote:
>
>
> Hello,
>
> I am posting this for a fellow Revcon owner with some fuel injection
> issues. I'll paste his request below. So, if anyone has the calibration
> numbers, please let me know and I'll forward this information to him.
>
> Thanks a bunch.
>
> Scott
> The Flying Brick
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: Fuel Injection Help [message #93069 is a reply to message #93062] |
Sat, 24 July 2010 12:18 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
As one of the EBL pioneers on the GMC 455, I started with the 454 Bin (Bin 13 if I recall). It ran much better right off than it ever did on the Howell, and the Howell was an improvement over the carb.
Be careful with the version of EBL firmware you get a Bin from. There recently was an upgrade and it changes the Bin. I am still using the older version so my Bin would not likely be compatible with your EBL.
Also look at the tops of the injectors you have on your TBI. If they are domed shape, then you likely have 80 pound per hour injectors, if not, then they are most likely 63pph injectors. This is critical as it determines the fuel pressure you must use and the BPC setting. Read the Google group notes carefully on this. You want to keep your VE tables below about 85 max.
You will love the EBL.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|
|
Re: Fuel Injection Help [message #93075 is a reply to message #93062] |
Sat, 24 July 2010 13:43 |
George Beckman
Messages: 1085 Registered: October 2008 Location: Colfax, CA
Karma: 11
|
Senior Member |
|
|
rowing guy wrote on Sat, 24 July 2010 08:55 | Hello,
I am posting this for a fellow Revcon owner with some fuel injection issues. I'll paste his request below. So, if anyone has the calibration numbers, please let me know and I'll forward this information to him.
Thanks a bunch.
Scott
The Flying Brick
Robert asked me to put this out to the gearheads in the group: Does anyone have
the calibration numbers for a Dynamic EFI - as installed in their rig (455ci)? He
figured someone has been running a coach and already has the best numbers. That
made sense to me. If anyone has - and could email -those calibrations we would
|
Ken's suggestion is excellent. There are a number of us working with the EBL. We have a number of bins to share. Your friend won't be sorry about getting the EBL.
I have the same setup as your friend; 455, EBL, VSS, elections spark and am willing to share as are others. Gbeckman at pggp dot com.
'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
|
|
|