GMCforum: GMCnet » Tubing fabrication

Home » Public Forums » GMCnet » Tubing fabrication

Show: Today's Messages :: Polls :: Message Navigator

Tubing fabrication [message #91804]

Tue, 13 July 2010 13:37

petemosss

Messages: 221
Registered: August 2008
Location: Jacksonville, Florida

Karma:

Senior Member

When flaring 37 deg ends on steel tubing one uses steel nuts and sleeves.

When flaring 37 deg ends on copper tubing one uses steel nuts and sleeves.

When flaring 37 deg ends on aluminum tubing can one use steel nuts and sleeves vs the overpriced speedshop aluminum nuts and sleeves?

Pete 74 Canyon Lands 26' "Emery"

Report message to a moderator

[Message index]

		Tubing fabrication By: petemosss on Tue, 13 July 2010 13:37
		Re: Tubing fabrication By: GeorgeRud on Tue, 13 July 2010 16:21
		Re: [GMCnet] Tubing fabrication By: Steven Ferguson on Wed, 14 July 2010 07:27
		Re: [GMCnet] Tubing fabrication By: Carleton Douglas[1] on Wed, 14 July 2010 07:41
		Re: [GMCnet] Tubing fabrication By: Steven Ferguson on Wed, 14 July 2010 17:13
		Re: [GMCnet] Tubing fabrication By: gmcrv1 on Wed, 14 July 2010 17:19
		Re: Tubing fabrication By: petemosss on Thu, 15 July 2010 08:22

Previous Topic:	[GMCnet] squirrel repellent test results
Next Topic:	Hatch latches

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 03 10:27:00 CDT 2024

Total time taken to generate the page: 0.01227 seconds