Onan carb problems [message #91470] |
Wed, 07 July 2010 20:38 |
GMCNUSA
Messages: 283 Registered: August 2006 Location: Indianapolis, IN
Karma:
|
Senior Member |
|
|
My Onan generator has never been used very often by us but I have no dash A/C and am tired of driving in the heat. The Onan has been running rough lately. This week I was using it to run roof air and it ran about 30 min and died and then would only run a few minutes at a time. So I decided to check filters in fuel pump and carb bowl, they looked perfect. When I reassembled everything the carb poured fuel out of it. I cleaned float valve and reassembled and still leaked. Bought carb rebuild kit replaced float valve and it still leaks.
Does the fuel pump have a regulator in it? Is it possible for the pump to be passing to much pressure and forcing float valve open? What is the pressure supposed to be? I checked the pressure with a 0 to 30 PSI gauge and it read 5 PSI is this too high? Any thoughts will be welcomed.
Thanks
Larry Dilk
Indianapolis, IN
76 Eleganza II
Patterson 455,Turbo City TBI,
Just LOVE It!
|
|
|