GMCforum: GMCnet » Need a Transmisson

Home » Public Forums » GMCnet » Need a Transmisson

Show: Today's Messages :: Polls :: Message Navigator

Need a Transmisson [message #91353]

Wed, 07 July 2010 01:14

Fiveyellowhorse

Messages: 11
Registered: June 2010

Karma: 0

Junior Member

I was told today that there is a crack in the housing. That being the case. Where do you get a transmisson? I am in Texas.

George

Report message to a moderator

Re: Need a Transmisson [message #91355 is a reply to message #91353]

Wed, 07 July 2010 02:21

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Manny, There is none better. Also get one of his rebuilt torque converters at the same time.

From the GMC suppliers page on www.bdub.net

Manny Trovao - Transmissions (including Switch Pitch) built specifically for our motorhomes. 3.50:1 Power Drive chain and sprockets. San Jose, CA 408-937-1583 mtrovao@hughes.net

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: Need a Transmisson [message #91362 is a reply to message #91353]

Wed, 07 July 2010 04:52

Rusty

Messages: 197
Registered: October 2005
Location: Philadelphia Pa

Karma: 0

Senior Member

Ken Frey in Quakertown PA has them in stock

http://www.kenlfreyautorepair.com/contact

Rusty
75 Glenbrook
Philadelphia Pa

Report message to a moderator

Re: [GMCnet] Need a Transmisson [message #91363 is a reply to message #91353]

Wed, 07 July 2010 05:42

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

>
>
> I was told today that there is a crack in the housing. That being the case.
> Where do you get a transmission? I am in Texas.
>
> I would guess you may be talking to a transmission shop ,or some other
repair person. you should know our trannys are not just car trannys, and a
lot of the parts to rebuild our transmissions are not available to the
average rebuild facility.

read here some of the things that make ours different.
'
http://users.california.com/~eagle/SWITCH.html

go to the "what to look for" section. (then call Manny ;>)

gene

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Need a Transmisson [message #91364 is a reply to message #91353]

Wed, 07 July 2010 05:47

Billy Massey

Messages: 916
Registered: January 2004
Location: Central Texas

Karma: 1

Senior Member

Where in Texas? I know of a rebuilt trans for a GMC sitting in Waco
waiting on a buyer.

bdub

On Wed, Jul 7, 2010 at 1:14 AM, George Sells <georgesells1949@yahoo.com> wrote:
>
>
> I was told today that there is a crack in the housing. That being the case. Where do you get a transmisson? I am in Texas.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

bdub
bdub.net

Report message to a moderator

[GMCnet] Need a Transmisson [message #91370 is a reply to message #91364]

Wed, 07 July 2010 07:11

Charles

Messages: 455
Registered: January 2004

Karma: 0

Senior Member

Bill,
Who has it? How much?
I have two. One condition unknown, the other
rebuilt 5 or 6 years ago by someone in OK.
Rebuilder unknown. I don't think it was Bill Bramlett.
Can not varify rebuild. Trying to determine prices.
$250 for core? $500.00 for rebuild. Rebuild is still
on pallet.
Charles
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Charles Wersal
Duncanville, Texas
26 foot 1975 Glenbrook
Pandora's Box

Report message to a moderator

Re: [GMCnet] Need a Transmisson [message #91385 is a reply to message #91370]

Wed, 07 July 2010 09:54

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

I run the Manny Tranny myself. If it breaks, Manny is good with being the butt of the joke. I like a builder with a sense of humor. Would run no other, unless it was cheaper, Very Happy

Just joking. There are a few of Manny's rebuilds scattered around the country to save on shipping.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: Need a Transmisson [message #91387 is a reply to message #91353]

Wed, 07 July 2010 09:58

Fiveyellowhorse

Messages: 11
Registered: June 2010

Karma: 0

Junior Member

Thanks for the information. Yes I do know that these trans are special. I am leaning a little slow. Come here first not later.

George

Report message to a moderator

Previous Topic:	Lug Centric Wheels: Pros and cons?
Next Topic:	[GMCnet] Barely Uneventful Trip to GMCDL Rally

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 11 22:16:46 CDT 2024

Total time taken to generate the page: 0.01096 seconds