GMCforum: GMCnet » [GMCnet] Blown engine in MO

Home » Public Forums » GMCnet » [GMCnet] Blown engine in MO

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Blown engine in MO [message #90683]

Thu, 01 July 2010 13:10

Tom Crook

Messages: 4
Registered: March 2004

Karma: 0

Junior Member

There was only about 30k on the engine I replaced 3 1/2 years ago. It
was one of the first Jaspers and was pre roller cam. After the
"autotopsie" I will update the net on what happened.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Blown engine in MO [message #90701 is a reply to message #90683]

Thu, 01 July 2010 15:32

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Hmmm, 30 k is what we had on our's. It was not a Jasper but a Tx. rebuild. We now have 4k on the engine we got from Jim K.
Crossing my fingers til I pass 30 k.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Previous Topic:	[GMCnet] How to Change Cylinder Heads
Next Topic:	gas spring installation

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 20 03:02:16 CDT 2024

Total time taken to generate the page: 0.39656 seconds