GMCforum: GMCnet » [GMCnet] "Y" pipe

Home » Public Forums » GMCnet » [GMCnet] "Y" pipe

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] "Y" pipe [message #90415]

Tue, 29 June 2010 10:27

pete lyons

Messages: 81
Registered: June 2010

Karma:

Member

Ok, the saga continues. the local exhaust shops estimate came in way over my
budget, so I'm either driving to Cincinnati or now i'm pondering doing it in
the driveway.

I've seen some fabricated Y pipes that some have you have fabricated, so I'm
wondering if I could just use one of these:
http://www.summitracing.com/parts/MPE-10778/

Thank you in advance for you advice/wisdom.
pete

--
Pete Lyons
New Albany, IN
76 Eleganza II "Optimus Prime"
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] "Y" pipe By: pete lyons on Tue, 29 June 2010 10:27
		Re: [GMCnet] "Y" pipe By: Larry on Tue, 29 June 2010 10:55
		Re: [GMCnet] "Y" pipe By: Ken Coit on Tue, 29 June 2010 16:27
		Re: [GMCnet] "Y" pipe By: WD0AFQ on Tue, 29 June 2010 17:07
		Re: [GMCnet] "Y" pipe By: jimk on Tue, 29 June 2010 19:41
		Re: [GMCnet] "Y" pipe By: GeorgeRud on Tue, 29 June 2010 16:25
		Re: [GMCnet] "Y" pipe By: fred v on Tue, 29 June 2010 18:09
		Re: [GMCnet] "Y" pipe By: USAussie on Tue, 29 June 2010 23:30
		Re: [GMCnet] "Y" pipe By: ljdavick on Wed, 30 June 2010 00:40
		Re: [GMCnet] "Y" pipe By: pete lyons on Wed, 30 June 2010 08:05
		Re: [GMCnet] "Y" pipe By: Keith V on Wed, 30 June 2010 12:05
		Re: [GMCnet] "Y" pipe By: pete lyons on Wed, 30 June 2010 12:46
		Re: [GMCnet] "Y" pipe By: Larry on Wed, 30 June 2010 12:35
		Re: [GMCnet] "Y" pipe By: tphipps on Wed, 30 June 2010 12:43
		Re: [GMCnet] "Y" pipe By: Keith V on Wed, 30 June 2010 13:05

Previous Topic:	[GMCnet] 26' GMC & 500 HP Dyno ???
Next Topic:	[GMCnet] Parts Interchange

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 22 02:24:11 CDT 2024

Total time taken to generate the page: 0.01391 seconds