GMCforum: GMCnet » [GMCnet] 2" or 3" exhaust?

Home » Public Forums » GMCnet » [GMCnet] 2" or 3" exhaust?

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] 2" or 3" exhaust? [message #90198]

Sun, 27 June 2010 20:15

pete lyons

Messages: 81
Registered: June 2010

Karma:

Member

This may be one of those things that opinions are split down the middle.

Hopefully i will finally have the Thorley headers i purchased 6 years ago
installed.

The question is, should I do a 3" system or 2"?

One single muffler at the rear, or two just past the engine in an original
configuration?

Anything need to move when installing the headers?

Thanks!
Pete Lyons
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] 2" or 3" exhaust? By: pete lyons on Sun, 27 June 2010 20:15
		Re: [GMCnet] 2" or 3" exhaust? By: Charles on Sun, 27 June 2010 20:30
		Re: [GMCnet] 2" or 3" exhaust? By: carguy on Sun, 27 June 2010 20:36
		Re: [GMCnet] 2" or 3" exhaust? By: Keith V on Sun, 27 June 2010 20:49
		Re: [GMCnet] 2" or 3" exhaust? By: WD0AFQ on Sun, 27 June 2010 21:28
		Re: [GMCnet] 2" or 3" exhaust? By: Ken Burton on Mon, 28 June 2010 02:26
		Re: [GMCnet] 2" or 3" exhaust? By: pete lyons on Mon, 28 June 2010 06:26
		Re: [GMCnet] 2" or 3" exhaust? By: Mr ERFisher on Mon, 28 June 2010 06:54
		Re: [GMCnet] 2" or 3" exhaust? By: powerjon on Sun, 27 June 2010 20:37
		Re: [GMCnet] 2" or 3" exhaust? By: Douglas Norton on Sun, 27 June 2010 21:49
		Re: [GMCnet] 2" or 3" exhaust? By: WD0AFQ on Sun, 27 June 2010 23:35
		Re: [GMCnet] 2" or 3" exhaust? By: Douglas Norton on Mon, 28 June 2010 00:16

Previous Topic:	[GMCnet] Mondello Valley Tray VT-581
Next Topic:	How can I tell if my fan clutch is working?

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Oct 26 03:30:18 CDT 2024

Total time taken to generate the page: 0.00832 seconds