| JC4 aux vacuum pump[ [message #89747] |
Thu, 24 June 2010 16:28 |
jayrabe
Messages: 509
Registered: June 2009
Location: Portland, OR
Karma: 0
|
Senior Member |
|
|
Finally getting around to installing my aux vac pump (JC4 from Applied) - or attempting to. Bought some PB Blaster to loosen the very rusty bolts on the booster so I can hang the JC4 bracket. Went to NAPA to get vac hose, but the largest they had was 3/8 and it wouldn't fit. Came home and measured the hose barbs on the pump, and now I'm really confused. The one that points tangential to the pump rotation (presumably the suction) measures about .630". The one that points perpendicular to the pump axis measures .540" Yet I understood this thing was supposed to go inline in the hose that runs from the manifold to the booster, so that kind of requires the same size hoses on input & output.
Can anybody clarify this for me?
Thanks
J
76 PB
Portland, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
