Re: [GMCnet] Alternator Warning Light [message #89085 is a reply to message #89072] |
Fri, 18 June 2010 06:17 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma:
|
Senior Member |
|
|
Karen,
Since that bulb compares the voltage at the fuse to that at terminal 1 of
the alternator (the brown wire in the plug), I'd next check that voltage
with the ignition switch in Aux and Ign.
The 1.5 VDC at the fuse with Ign off is curious. I'd put a load (test
light) on there and check the voltage to determine whether it's a high
impedance load causing the voltage to appear.
Ken H.
On Fri, Jun 18, 2010 at 12:03 AM, KB <kab7@sonic.net> wrote:
> To answer your questions: with the key in the "on" position (engine off),
> there's 12+ volts at the Inst/Tran fuse holder,
> the other gauges are on, but the alternator light is NOT on.
>
> With the key in Accessory, the alternator light is on, the other gauges are
> off, and
> I read about 1.5 volts at the fuse holder.
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|