GMCforum: GMCnet » [GMCnet] Frozen Allen Screw in mirror arm.

Home » Public Forums » GMCnet » [GMCnet] Frozen Allen Screw in mirror arm.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Frozen Allen Screw in mirror arm. [message #88921]

Wed, 16 June 2010 22:24

dngmissett

Messages: 84
Registered: February 2004

Karma:

Member

I'm trying to��adjust the arm on a remote�Velvac mirror and the 3/16 Allen screw is frozen and I'm afraid I'm�getting close to rounding it out *+&^%$. Anyone have any tricks they would be willing to share ? I'm afraid to get anywhere near it with heat and ruin the paint.�I've tried an 18V cordless impact and no luck.�All other allen screws on these mirrors are good to go but this bugger will not budge. Appreciate any suggestions or techniques.
�
�
Dick Missett
Wyoming, PA
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Frozen Allen Screw in mirror arm. By: dngmissett on Wed, 16 June 2010 22:24
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: James Hupy on Wed, 16 June 2010 22:35
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: Terry Skinner on Wed, 16 June 2010 23:22
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: Ken Burton on Thu, 17 June 2010 01:43
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: peter bailey on Thu, 17 June 2010 03:28
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: jimk on Fri, 18 June 2010 20:51
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: k2gkk on Thu, 17 June 2010 06:25
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: Rusty on Thu, 17 June 2010 07:43
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: Mr ERFisher on Thu, 17 June 2010 08:25
		Re: [GMCnet] Frozen Allen Screw in mirror arm. By: Harry on Thu, 17 June 2010 10:05

Previous Topic:	[GMCnet] REAR BRAKE TORQUE REACTION SYSTEM
Next Topic:	Re: [GMCnet] Why is the front higher than the rear on my GMC?

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Mar 10 21:30:51 CDT 2025

Total time taken to generate the page: 0.00858 seconds