Re: [GMCnet] Cruise Control repairing [message #88586] |
Mon, 14 June 2010 18:36 |
chucklexie
Messages: 44 Registered: June 2010
Karma: 0
|
Member |
|
|
My chain is just out in the open. Doesn't work either so what the hea!!! I have vacuum poblem big time and it may work once I get this beast under a little control.
Chuck Ellis
---------- Original Message ----------
From: Ken Coit <ktcoit@gmail.com>
To: gmclist <gmclist@temp.gmcnet.org>
Subject: Re: [GMCnet] Cruise Control repairing
Date: Mon, 14 Jun 2010 15:31:57 -0400
Rubber boot?? The last time I had the cruise control hooked up the chain
hung up on the base of the distributor and nearly resulted in an accident.
The chain feeds through a brass/bronze tube, which I thought was stock. It
seemed as if the tube needed to be supported with a bracket, but there is
none. What is the correct installation?
On Mon, Jun 14, 2010 at 2:39 PM, fred veenschoten <fredntoni@cox.net> wrote:
>
>
> i believe Jim K. has new ones.
>
> --
> Fred V
> '77 Royale RB 455
> P'cola, Fl
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Ken Coit, ND7N
Raleigh, NC
Parfait Royale
1978 Royale Rear Bath, 403, 3.07
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|