GMCforum: GMCnet » [GMCnet] Wheels with less offset

Home » Public Forums » GMCnet » [GMCnet] Wheels with less offset

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Wheels with less offset [message #87764]

Tue, 08 June 2010 13:12

Gary Casey

Messages: 448
Registered: September 2009

Karma:

Senior Member

Someone posted that wheels from a Dodge 2500 or Ford F-250 will fit the front hubs and will result in about a 2 inch increased track at each side. I've been looking for a pair of these wheels, but I'm finding that the "standard" (whose standard? Ford? Dodge? GM?) bolt pattern changed in about 1996. Previous to that the bolt circle diameter was 6.5 as best I can tell and after that it changed to a metric pattern. True? If so, what trucks have the same pattern as ours? I'm getting confused.
Gary Casey
'73 23 with a narrow front end...

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Wheels with less offset By: Gary Casey on Tue, 08 June 2010 13:12
		Re: [GMCnet] Wheels with less offset By: WD0AFQ on Tue, 08 June 2010 13:34
		Re: [GMCnet] Wheels with less offset By: Carl S. on Tue, 08 June 2010 14:38
		Re: [GMCnet] Wheels with less offset By: Gary Casey on Tue, 08 June 2010 20:40
		Re: [GMCnet] Wheels with less offset By: USAussie on Tue, 08 June 2010 21:39
		Re: [GMCnet] Wheels with less offset By: Bob de Kruyff on Thu, 10 June 2010 16:39

Previous Topic:	Re: [GMCnet] Why is the front higher than the rear on a GMC
Next Topic:	Re: [GMCnet] Why does the front ride higher than the rear on my GMC

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Oct 07 21:34:41 CDT 2024

Total time taken to generate the page: 0.00699 seconds