Home » Public Forums » GMCnet » Greasing the bogies
Greasing the bogies [message #86783] |
Tue, 01 June 2010 03:41 |
|
MangoMushroom
Messages: 67 Registered: August 2008 Location: Emeryville, CA
Karma: 0
|
Member |
|
|
Greetings fellow GMC'ers
I'm concerned I've not been properly lubricating my bogies... None of my myriad of manuals have specific information on how to do this
My question:
What is the proper method to grease the bogies at the back of the coach?
I understand there are kits you can purchase to make this process easier, but how was this maintenance originally taken care of? If possible, I'd like to be able to grease them properly without buying additional tools, etc.
I do have a grease gun, and been using it for the pins facing outward.
Thanks ahead of time for your feedback, and happy trails!
****MangoMushroom
`76 GMC Birchaven named "Harvey"
|
|
|
Re: [GMCnet] Greasing the bogies [message #86787 is a reply to message #86783] |
Tue, 01 June 2010 05:46 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
here is some info
http://gmcmotorhome.info/rear.html#BOGIE
gene
On Tue, Jun 1, 2010 at 1:41 AM, Andre Mandel <andre.mandel@gmail.com> wrote:
>
>
> Greetings fellow GMC'ers
>
>
> I'm concerned I've not been properly lubricating my bogies... None of my
> myriad of manuals have specific information on how to do this
>
> My question:
>
> What is the proper method to grease the bogies at the back of the coach?
>
> I understand there are kits you can purchase to make this process easier,
> but how was this maintenance originally taken care of? If possible, I'd like
> to be able to grease them properly without buying additional tools, etc.
>
> I do have a grease gun, and been using it for the pins facing outward.
>
> Thanks ahead of time for your feedback, and happy trails!
> --
> ****MangoMushroom
> `76 GMC Birchaven
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: Greasing the bogies [message #86915 is a reply to message #86783] |
Wed, 02 June 2010 07:40 |
Dave Wilson
Messages: 94 Registered: September 2009 Location: Livonia, MI
Karma: 0
|
Member |
|
|
[quote title=MangoMushroom wrote on Tue, 01 June 2010 03:41]Greetings fellow GMC'ers
I'm concerned I've not been properly lubricating my bogies... None of my myriad of manuals have specific information on how to do this
My question:
What is the proper method to grease the bogies at the back of the coach?
quote]
Hi Mango,
When we grease our rear bogies, we use a floor jack to raise the bogie to the point just before the wheels leave the ground. Then feed the grease in and watch at the inboard area (right where the wheel well liner meets the frame) to see the old grease move. Usually it's two or four pumps on the gun. We do this after every trip along with an oil change. Hope that helps!
Dave Wilson
'77 Eleganza II
Photos @ http://www.gmcmhphotos.com/photos/member.php?uid=2183&protype=1
|
|
|
Re: Greasing the bogies [message #86929 is a reply to message #86915] |
Wed, 02 June 2010 08:59 |
|
WD0AFQ
Messages: 7111 Registered: November 2004 Location: Dexter, Mo.
Karma: 207
|
Senior Member |
|
|
Same here. Watch for that grease to come out the back. Sometimes I use a flashlight to see the rear, depends on how the sun is shining.
Dan
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
[Updated on: Wed, 02 June 2010 08:59] Report message to a moderator
|
|
|
Re: Greasing the bogies [message #86952 is a reply to message #86929] |
Wed, 02 June 2010 10:57 |
|
WD0AFQ wrote on Wed, 02 June 2010 08:59 | Same here. Watch for that grease to come out the back. Sometimes I use a flashlight to see the rear, depends on how the sun is shining.
Dan
|
well hells bells, I've put 4k miles on my coach since I took ownership, and never did that as of yet. guess that means I need to get a grease gun and get to pump'n'...
73 Canyon Lands, (a.k.a. The Yellow Submarine) West Los Angeles CA
|
|
|
Re: Greasing the bogies [message #87007 is a reply to message #86783] |
Wed, 02 June 2010 18:04 |
fred v
Messages: 999 Registered: April 2006 Location: pensacola, fl.
Karma: 0
|
Senior Member |
|
|
if you jack up under the top hat and then let the air out of the bag you can put a small hyd. jack under the bogie arm where the spindle attaches and lift the wheel off the ground.
now you can push and pull on the wheel to see how much play you have in the pins and bushings. worth doing if you haven't checked this yet.
i suspect that much of the poor handling of the coach is due to pin/bushing wear on the center wheel.
Fred V
'77 Royale RB 455
P'cola, Fl
|
|
|
Re: Greasing the bogies [message #87085 is a reply to message #87007] |
Thu, 03 June 2010 10:03 |
bukzin
Messages: 840 Registered: April 2004 Location: North California
Karma: 0
|
Senior Member |
|
|
fred v wrote on Wed, 02 June 2010 16:04 | if you jack up under the top hat and then let the air out of the bag you can put a small hyd. jack under the bogie arm where the spindle attaches and lift the wheel off the ground.
now you can push and pull on the wheel to see how much play you have in the pins and bushings. worth doing if you haven't checked this yet.
i suspect that much of the poor handling of the coach is due to pin/bushing wear on the center wheel.
|
+++++++++++++++++++++++++++++++++++++++++++
What and where is a 'top hat'?
Anyone got photos?
Thanks
Bukzin
1977 Palm Beach
|
|
|
Re: Greasing the bogies [message #87110 is a reply to message #87085] |
Thu, 03 June 2010 11:45 |
fred v
Messages: 999 Registered: April 2006 Location: pensacola, fl.
Karma: 0
|
Senior Member |
|
|
bukzin wrote on Thu, 03 June 2010 10:03 |
fred v wrote on Wed, 02 June 2010 16:04 | if you jack up under the top hat and then let the air out of the bag you can put a small hyd. jack under the bogie arm where the spindle attaches and lift the wheel off the ground.
now you can push and pull on the wheel to see how much play you have in the pins and bushings. worth doing if you haven't checked this yet.
i suspect that much of the poor handling of the coach is due to pin/bushing wear on the center wheel.
|
+++++++++++++++++++++++++++++++++++++++++++
What and where is a 'top hat'?
Anyone got photos?
Thanks
|
the top hat is the big casting that the bogie arms are attached to. this is where you would place a floor jack or use one of the bottle jack hooks if you have one. if you don't then you need to get one.
Fred V
'77 Royale RB 455
P'cola, Fl
|
|
|
Re: [GMCnet] Greasing the bogies [message #87147 is a reply to message #87110] |
Thu, 03 June 2010 18:00 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
That's a new nomenclature for me, Fred. The only part of the rear
suspension I've ever heard referred to as "top hat" is the flanged bushing
on the outer end of each pin. That bushing, which is intended to control
the axial play in the suspension arm, does indeed look like a top hat in
profile.
I think the term "bogie" is more commonly used to refer to the casting to
which the suspension arms are mounted. The GMC name for it is "mounting
bracket". I guess that seems a little too generic a term for it to have
found general acceptance.
The term "bogie" is itself somewhat misleading. As a railroad expert like
you well knows, it generally refers to a complete set of 4-6 wheels and
suspension members under one end of a railroad car. Yet I've never heard
anyone use "bogie" to refer to a complete suspension assembly.
Sorta like the front rear, or rear rear, or front back wheels. :-)
Ken H.
On Thu, Jun 3, 2010 at 12:45 PM, fred veenschoten <fredntoni@cox.net> wrote:
>
> ...
> the top hat is the big casting that the bogie arms are attached to. this is
> where you would place a floor jack or use one of the bottle jack hooks if
> you have one. if you don't then you need to get one.
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
Re: [GMCnet] Greasing the bogies [message #87191 is a reply to message #87148] |
Thu, 03 June 2010 20:56 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
The note was too long already. Since the aircraft nomenclature was adopted
from the railroad application, I thought it could implied.
Now as for the other military flying application, I'll be darned if I know
how unknown aircraft became known as "bogies". I sure "shot" at a lot of
them though, back when I was a Radar Intercept Officer (RO) in F-89J's and
F-101B's.
Ken H.
On Thu, Jun 3, 2010 at 7:06 PM, Rob Mueller <robmueller@iinet.net.au> wrote:
> Ken,
>
> Surprised you didn't mention that aircraft landing gear are referred to as
> bogies also.
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
Re: [GMCnet] Greasing the bogies [message #87212 is a reply to message #87210] |
Thu, 03 June 2010 21:52 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I think Ken is still a booby man.
On Thu, Jun 3, 2010 at 7:47 PM, Emery Stora <emerystora@mac.com> wrote:
>
> On Jun 3, 2010, at 7:56 PM, Ken Henderson <hend4800@bellsouth.net>
> wrote:
>
>> The note was too long already. Â Since the aircraft nomenclature was
>> adopted
>> from the railroad application, I thought it could implied.
>>
>> Now as for the other military flying application, I'll be darned if
>> I know
>> how unknown aircraft became known as "bogies". Â I sure "shot" at a
>> lot of
>> them though, back when I was a Radar Intercept Officer (RO) in
>> F-89J's and
>> F-101B's.
>>
>> Ken H.
>>
> Ken -- it's actually spelled "bogey". I'm pretty sure it refers to a
> "bogeyman".
>
> You remember -- he lived under your bed when you were a child.
>
> Emey Stora
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Greasing the bogies [message #87220 is a reply to message #87147] |
Thu, 03 June 2010 22:16 |
fred v
Messages: 999 Registered: April 2006 Location: pensacola, fl.
Karma: 0
|
Senior Member |
|
|
Ken Henderson wrote on Thu, 03 June 2010 18:00 | That's a new nomenclature for me, Fred. The only part of the rear
suspension I've ever heard referred to as "top hat" is the flanged bushing
on the outer end of each pin. That bushing, which is intended to control
the axial play in the suspension arm, does indeed look like a top hat in
profile.
I think the term "bogie" is more commonly used to refer to the casting to
which the suspension arms are mounted. The GMC name for it is "mounting
bracket". I guess that seems a little too generic a term for it to have
found general acceptance.
The term "bogie" is itself somewhat misleading. As a railroad expert like
you well knows, it generally refers to a complete set of 4-6 wheels and
suspension members under one end of a railroad car. Yet I've never heard
anyone use "bogie" to refer to a complete suspension assembly.
Sorta like the front rear, or rear rear, or front back wheels.
Ken H.
On Thu, Jun 3, 2010 at 12:45 PM, fred veenschoten <fredntoni@cox.net> wrote:
>
> ...
> the top hat is the big casting that the bogie arms are attached to. this is
> where you would place a floor jack or use one of the bottle jack hooks if
> you have one. if you don't then you need to get one.
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
wow, did i blow that one. every time i heard the term top hat used i thought they were talking about the casting or mounting bracket. i learn well from being corrected.
Fred V
'77 Royale RB 455
P'cola, Fl
|
|
|
Re: [GMCnet] Greasing the bogies [message #87222 is a reply to message #87210] |
Thu, 03 June 2010 22:14 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
You could be right, Emery. But us southerners wouldn't know 'bout that
cause we only knew about the boogerman! In fact, we even had a rough
neighborhood known as boogerville.
Bogey (sing.) Unknown aircraft
Bogies (pl.) Multiple unknown aircraft
Bogie (sing.) Wheel assembly
Bogies (pl.) Multiple wheel assemblies
???
They tell me the ambiguity of English is one of its strengths. :-(
Ken H.
On Thu, Jun 3, 2010 at 10:47 PM, Emery Stora <emerystora@mac.com> wrote:
> Ken -- it's actually spelled "bogey". I'm pretty sure it refers to a
> "bogeyman".
>
> You remember -- he lived under your bed when you were a child.
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Greasing the bogies [message #87226 is a reply to message #87222] |
Thu, 03 June 2010 22:28 |
GMCNUSA
Messages: 283 Registered: August 2006 Location: Indianapolis, IN
Karma: 0
|
Senior Member |
|
|
[.
Bogey (sing.) Unknown aircraft
Bogies (pl.) Multiple unknown aircraft
Bogie (sing.) Wheel assembly
Bogies (pl.) Multiple wheel assemblies
???
> "bogeyman".
>
>
[/quote]
Don't forget the Bogey Creek monster!
Larry Dilk
Indianapolis, IN
76 Eleganza II
Patterson 455,Turbo City TBI,
Just LOVE It!
|
|
|
|
|
|
|
Goto Forum:
Current Time: Thu Oct 10 07:19:45 CDT 2024
Total time taken to generate the page: 0.04033 seconds
|