GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] rubber seals around windows
[GMCnet] rubber seals around windows [message #85316] Wed, 19 May 2010 20:08 Go to next message
George D is currently offline  George D   United States
Messages: 6
Registered: November 2006
Karma: 0
Junior Member
We have bought the rubber seals for all the windows. Does anyone have any suggestions on the easiest way to go about installing them a few have two pieces and others have one piece. Thanks
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] rubber seals around windows [message #85317 is a reply to message #85316] Wed, 19 May 2010 20:16 Go to previous messageGo to next message
Craig Lechowicz is currently offline  Craig Lechowicz   United States
Messages: 541
Registered: October 2006
Location: Waterford, MI
Karma: 0
Senior Member
George D wrote on Wed, 19 May 2010 21:08

We have bought the rubber seals for all the windows. Does anyone have any suggestions on the easiest way to go about installing them a few have two pieces and others have one piece. Thanks




George, here is a link to a page on Jim Bound's site that gives instructions.

<http://www.gmccoop.com/new_page_9.htm>

The best way to do it is rope one of your friends into doing it for you, like I did. I found it really tough to get the rubber strips into place using my thumbs, but my friend, who already did one set was really good at it. All of mine were one piece as best as I can recall.


Craig Lechowicz
'77 Kingsley, Waterford, MI
Re: [GMCnet] rubber seals around windows [message #85322 is a reply to message #85316] Wed, 19 May 2010 20:36 Go to previous messageGo to next message
mike miller   United States
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
Senior Member
George D wrote on Wed, 19 May 2010 18:08

We have bought the rubber seals for all the windows. Does anyone have any suggestions on the easiest way to go about installing them a few have two pieces and others have one piece.


What year is your coach? The windows changed in 1975 and the rubber seals are different... different ways of installing.

I did my 1973 quite a few years ago... I have forgotten almost everything about it except following Jim B's printed instructions.


Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com
Re: [GMCnet] rubber seals around windows [message #85340 is a reply to message #85317] Wed, 19 May 2010 22:29 Go to previous messageGo to next message
midlf is currently offline  midlf   United States
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
Senior Member
Craig Lechowicz wrote on Wed, 19 May 2010 20:16
George, here is a link to a page on Jim Bound's site that gives instructions.

<[url

http://www.gmccoop.com/new_page_9.htm[/url]>




The heading on this webpage is "Lets replace late style window rubbers!" so it may not apply if you have a 73 or 74.


Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
icon14.gif  Re: [GMCnet] rubber seals around windows [message #85348 is a reply to message #85316] Thu, 20 May 2010 00:11 Go to previous message
Blondiee is currently offline  Blondiee   United States
Messages: 20
Registered: November 2009
Location: Round Rock, Texas
Karma: 0
Junior Member
Not sure how to attach an earlier thread.

Later Model Fixed Window Seals [message #81013]

Good reading.

Frank


Round Rock Texas 77' ELII 26-3 TZE167V100020
Previous Topic: Chemcal sensitivity and Loctite 242
Next Topic: [GMCnet] AUBURN - VENDOR VIDEO-
Goto Forum:
  


Current Time: Fri Sep 27 13:16:45 CDT 2024

Total time taken to generate the page: 0.01782 seconds