| Notchy Steering CV [message #84258] |
Wed, 12 May 2010 18:42  |
g.winger
Messages: 792
Registered: February 2008
Location: Warrenton,Missouri
Karma:
|
Senior Member |
|
|
|
Took it apart, didn't note which way it came apart. Which way does it go back together??? If you look at the outer ring it has a taper. The cage is tapered and the the center (star) is tapered. If you look at it on the bench and don't move the ring that leaves the cage 2 ways to go in and the star 2 ways to go in. BUT,,,you could rotate each of those 6 diffrent ways. I have reassembled it about 12 to 14 diffrent ways. Some just don't work at all. The ones that are close are still "notchy". Hangs up at one place. Balls look good as do the cage and starr. Really very little wear. Searched thr foto site but no joy. Thanks for any help. Also to Steve and Larry. Got it to shift in auto and manual,,,up and down. Thanks in advance,,,PL
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
