| Re: [GMCnet] 16 inch Chevy Wheels [message #81329] |
Wed, 21 April 2010 11:00 |
rallymaster
Messages: 662
Registered: February 2004
Location: North Plains, ORYGUN
Karma:
|
Senior Member |
|
|
16" GMC Motorhome Steel Wheel Email to send
I did a lot of looking for 16" steel replacements. You have to go to each
place that says,"Yeah, we gottem", and check for yourself. I put about
150 miles on my car, checking the "recycle centers" and the places that
sell new wheels, after they said they had GMC dually wheels.
Here is some Info from my records. It's a from a bunch of posts from a
lot of people.
NOTE: Any prices listed are out of date
RonC
<snip>
The first sentence is the most important.
Beware: there are two spider shapes for GM dually wheels. Either will fit
the GM & Chev trucks, but only the dome shaped one will fit the GMC MH.
The other one (sort of a truncated cone shape) will not fit.
------------------
Size 16x6
Circle - 8 - 6.5"
Bolt hole dia .670
Hub bore dia. 4.567
Backspace 8.150
Offset 5.150
Wheel load pounds 2780
Max inflation 95
29587 is the steel wheel part number They were $66 at southwest wheel.
Fits Chevy 3500
359402 is the original GM part number
1062 is the Hollander interchange number
They were used on a lot of GM trucks - Here are a few of
them:
Pre 1976 may not be suitable for radial tires.
All C/P/G300 Dual 76'-00'
1 Ton P3500 Dual 76'-00
1 Ton P30 Dual 76'-00'
1 Ton K3500 4x4, Dual 76'-87'
1 Ton K30 4x4, Dual 76'-00'
1 Ton K3500 4x4, Dual 88'-00'
1 Ton G30 Dual 76'-00'
1 Ton C30 4x2, C3500 Dual 88'-00'
Jim Melberg <pb75gmc@comcast.net
-------------------
I can now say that the Accuride 29587 will not work on any GMC
The Kelly X45329 might work on coaches with standard front calipers.
Firestone does not make rims any more so unless you find them in a junk
yard they are not easily available
Dan Winchester
<endsnip>
On Tue, 20 Apr 2010 23:16:48 -0500 Michael Bozardt <ilse@earth-comm.com>
writes:
>
>
> With all due respect, what a bunch of maroons-all this BS about
> Chevy wheels and not one part number.
>
> After reading the thread, I check the local Craigslist and sure
> enough, "8 lug 16 inch Chevy wheels, 12 in stock". So I drive the
> 35 miles to Rosenberg, taking a GMC steel wheel with me and guess
> what I found?
>
> Not one had a similar offset to our wheels and they were like 12
> inches wide. There did not appear any way these wheels could fit a
> GMC. So, thanks, guys, I got suckered in thinking all I needed was
> a 16", 8 lug Chevy wheel-not so. There must be a specific part
> number, these wheels all had part numbers, that apply to our
> coaches. Will someone be kind enough to share that
> number??............Thanks,
> Michael(who does not like wasting his time) GEMRECS
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
