GMCforum: GMCnet » Bogie Pin Greasers

Home » Public Forums » GMCnet » Bogie Pin Greasers (Operational Question)

Show: Today's Messages :: Polls :: Message Navigator

Bogie Pin Greasers [message #79548]

Wed, 07 April 2010 10:12

westlanddave78

Messages: 27
Registered: March 2006
Location: Westland, MI

Karma:

Junior Member

Hi All. I installed the dual-Zerk bogie pin greasers on my coach some time ago. At the time, I understood I needed to jack up the coach at the bogie, elevate one wheel with a shovel, grease both Zerks, then do the other wheel. I've performed that ritual faithfully every since. Recently, I read (can't remember where) that with the greasers in place, it isn't necessary to unload the weight from the bogie pins as such. Is this correct? It certainly would be faster if so. TIA.

Dave P.
Westland, MI
75 Palm Beach

Report message to a moderator

[Message index]

		Bogie Pin Greasers By: westlanddave78 on Wed, 07 April 2010 10:12
		Re: [GMCnet] Bogie Pin Greasers By: Kosier on Wed, 07 April 2010 11:14
		Re: [GMCnet] Bogie Pin Greasers By: MikeT on Wed, 07 April 2010 17:43
		Re: Bogie Pin Greasers By: Rusty on Wed, 07 April 2010 17:49

Previous Topic:	[GMCnet] battery question
Next Topic:	Re: [GMCnet] Ive Had it!

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 20 10:37:32 CST 2024

Total time taken to generate the page: 0.01926 seconds